Very Computer

Having solved the unable to mount root filesystem problem, I am now
unable to boot 2.1.117. I select the correct image from the LILO prompt,
and get the following message:

LILO: linux-21
Loading linux-21......
Uncompressing linux-21.... Ok, now booting the kernel

At which point it immediately reboots the machine.

The funny thing is, it stopped doing that for a bit, but now started
again.

linux 2.0.34 boots fine, and both are on /dev/hda

lilo -v -q, for those interested:

LILO version 20, Copyright 1992-1997 Werner Almesberger

Reading boot sector from /dev/hda
Global settings:
  Delay before booting: 0.0 seconds
  Command-line timeout: 5.0 seconds
  Always enter boot prompt
  No default boot command line
Images:
  linux-21        *
    No password
    Boot command-line won't be locked
    No single-key activation
    VGA mode is taken from boot image
    Kernel is loaded "high", at 0x00100000
    Initial RAM disk is 191928 bytes
    No fallback
    Options: "ro root=301"
  linux-20
    No password
    Boot command-line won't be locked
    No single-key activation
    VGA mode is taken from boot image
    Kernel is loaded "low"
    Initial RAM disk is 191928 bytes
    No fallback
    Options: "ro root=301"
  NT4.0
    No password
    Boot command-line won't be locked
    No single-key activation
    No fallback
    BIOS drive 0x80 is mapped to 0x81
    BIOS drive 0x81 is mapped to 0x80

--
----------------------------------------------------
Avi Deitcher                    Morgan Stanley & Co.
Phone: (212)762-2724            Fax: (212)762-1009