My kernel cannot run!!!

My kernel cannot run!!!

Post by Andy-W » Fri, 17 Apr 1998 04:00:00



Hello:

computer have some error message then my computer cannot run linux:

:
:
:
:
had:ST33232A . 3077MB  w/128kb Cache,LBA,CHS=6253/16/63
hda:IRQ probe failed(0)
hab:IRQ probe failed(0)
hdc:IRQ probe failed(0)
hdc:CD-532E,ATAPI CDROM drive
hdc:IRQ probe failed(0)
ide0:UNABLE TO GET IRQ 14
ide1 at 0x170-0x376 on irq 15
:
:
:
:
Partition check:
VFS:Cannot Open root device 03:01
Kernel panic:VFS:Unable to mount root on 03:01

   How can i to do? Thank you very much.

I listed my computer hardware:

CPU: 486DX4-100
M/B: GiGA  VESA & ISA bus?]This MontherBoard not supported PnP and EIDE
HDD,So I
                                                    changed a new I/O card
to supported EIDE HDD?^
RAM: 20MB
HDD: Seagate 3.2GB (Ultra DMA33)
I/O Card: EIDE VESA bus (Support 4 EIDE HDD)
                primary    master:Segate 3.2GB HDD
                secondary master:TEAC  32x  CD-ROM
Net Card: D-LINK 220PCT  ISA bus
FDD: 1.2MB & 1.44MB
Audio card: Sound Blaster card

I listed some data in WIN95 (MY COMPUTER)

Sound Blaster:
   irq:05
   dma:01
   addr:(220-22f)(388-389)

Enthernet card:
   irq:12
   dma:
   addr:200-25f

EIDE card:
   Primary:
        irq:14
        dma:
        addr:(1f0-1f7)(3f6-3f6)
   Secondary:
        irq:15
        dma:
        addr:(170-177)(376-376)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
             ?u ?Yp?vo???T3No??

                http://203.66.31.27/andy.htm
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 
 
 

My kernel cannot run!!!

Post by Roy Stogn » Fri, 17 Apr 1998 04:00:00



>Hello:

>I download  linux kernel 2.0.33, and compil new kernel but reboot my
>computer have some error message then my computer cannot run linux:

>M/B: GiGA  VESA & ISA bus - This MontherBoard not supported PnP and EIDE
>HDD,So I changed a new I/O card to supported EIDE HDD

Go back to your old kernel (tell me you didn't delete it) for now; use
a boot disk to get back into your system; recompile the new kernel to
include support for that card.
---
Roy Stogner

 
 
 

1. My kernel cannot run!!!

Hello:

computer have some error message then my computer cannot run linux:

:
:
:
:
had:ST33232A . 3077MB  w/128kb Cache,LBA,CHS=6253/16/63
hda:IRQ probe failed(0)
hab:IRQ probe failed(0)
hdc:IRQ probe failed(0)
hdc:CD-532E,ATAPI CDROM drive
hdc:IRQ probe failed(0)
ide0:UNABLE TO GET IRQ 14
ide1 at 0x170-0x376 on irq 15
:
:
:
:
Partition check:
VFS:Cannot Open root device 03:01
Kernel panic:VFS:Unable to mount root on 03:01

   How can i to do? Thank you very much.

I listed my computer hardware:

CPU: 486DX4-100
M/B: GiGA  VESA & ISA bus?]This MontherBoard not supported PnP and EIDE
HDD,So I
                                                    changed a new I/O card
to supported EIDE HDD?^
RAM: 20MB
HDD: Seagate 3.2GB (Ultra DMA33)
I/O Card: EIDE VESA bus (Support 4 EIDE HDD)
                primary    master:Segate 3.2GB HDD
                secondary master:TEAC  32x  CD-ROM
Net Card: D-LINK 220PCT  ISA bus
FDD: 1.2MB & 1.44MB
Audio card: Sound Blaster card

I listed some data in WIN95 (MY COMPUTER)

Sound Blaster:
   irq:05
   dma:01
   addr:(220-22f)(388-389)

Enthernet card:
   irq:12
   dma:
   addr:200-25f

EIDE card:
   Primary:
        irq:14
        dma:
        addr:(1f0-1f7)(3f6-3f6)
   Secondary:
        irq:15
        dma:
        addr:(170-177)(376-376)

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
             ?u ?Yp?vo???T3No??

                http://203.66.31.27/andy.htm
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. COLA FAQ 5 of 6~ 25-Jan-2003

3. My Kernel Cannot Run!!!!!

4. Library libdb.so.1

5. My kernel cannot run!!

6. Technical Support

7. Cannot shutdown: shutdown already running (with kernel 1.2.13)

8. FreeBSD 2.2.6 - Can I increase my /usr partion size post install?

9. EXT2 corruption -- After running 2.5.46, my root partition cannot be mounted by older kernels

10. Cannot run 2.0 kernel on laptop

11. Cannot get new kernel running for some strange reason

12. Cannot log in as root AND cannot run xterm as user...

13. My Matlab 6.0 cannot run in Enlightenment but runs well in Sawfish, why?