modules not installed when compiling Kernel 2.2.19

modules not installed when compiling Kernel 2.2.19

Post by Edoardo Cos » Tue, 02 Oct 2001 00:29:21



Hi all,
I installed slackware 8.0 and decided to recompile the kernel in order
to have a good working config.

I setup my kernel then ran the usual
make dep
make bzImage
make modules
make modules_install

I ran into some problems when I reached "make modules".  So I moved
/lib/modules to /lib/modules.old in order to see if a dir was being
created and populated... it wasn't!

The following is a print screen of the error message I get.  I never
had a problem until now... Any clues would greatly be apreciated.
Ed.

# make modules
---snip---

cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce
-m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=686
-DMODULE -DMODVERSIONS -include
/usr/src/linux/include/linux/modversions.h   -c -o radio-miropcm20.o
radio-miropcm20.c
In file included from radio-miropcm20.c:13:
../sound/lowlevel/miroaci.h:9: #error Compiling a driver that needs
the ACI-mixer but without ACI-mixer support
radio-miropcm20.c: In function `pcm20_mute':
radio-miropcm20.c:33: warning: implicit declaration of function
`aci_write_cmd'
radio-miropcm20.c: In function `pcm20_setfreq':
radio-miropcm20.c:73: warning: implicit declaration of function
`aci_write_cmd_d'
radio-miropcm20.c: In function `pcm20_getsigstr':
radio-miropcm20.c:81: warning: implicit declaration of function
`aci_indexed_cmd'
{standard input}: Assembler messages:
{standard input}:9: Warning: Ignoring changed section attributes for
.modinfo
make[2]: *** [radio-miropcm20.o] Error 1
make[2]: Leaving directory `/usr/src/linux/drivers/char'
make[1]: *** [_modsubdir_char] Error 2
make[1]: Leaving directory `/usr/src/linux/drivers'
make: *** [_mod_drivers] Error 2
#

what I found in the following dir:
# find /usr/src/linux -name radio*
/usr/src/linux/include/config/net/radio.h
/usr/src/linux/include/config/radio
/usr/src/linux/drivers/char/radio-aimslab.c
/usr/src/linux/drivers/char/radio-aztech.c
/usr/src/linux/drivers/char/radio-sf16fmi.c
/usr/src/linux/drivers/char/radio-zoltrix.c
/usr/src/linux/drivers/char/radio-miropcm20.c
/usr/src/linux/drivers/char/radio-rtrack2.c
/usr/src/linux/drivers/char/radio-gemtek.c
/usr/src/linux/drivers/char/radio-cadet.c
/usr/src/linux/drivers/char/radio-typhoon.c
/usr/src/linux/drivers/char/radio-trust.c
/usr/src/linux/drivers/char/radio-maestro.c
/usr/src/linux/drivers/char/radio-aztech.o
/usr/src/linux/drivers/char/radio-sf16fmi.o
/usr/src/linux/drivers/char/radio-aimslab.o
/usr/src/linux/drivers/char/radio-rtrack2.o
/usr/src/linux/drivers/char/radio-typhoon.o
/usr/src/linux/drivers/char/radio-zoltrix.o
/usr/src/linux/drivers/char/radio-cadet.o
/usr/src/linux/Documentation/video4linux/radiotrack.txt
#

 
 
 

modules not installed when compiling Kernel 2.2.19

Post by Ellen Geertse » Tue, 02 Oct 2001 04:25:20


On 30 Sep 2001 08:29:21 -0700,


>The following is a print screen of the error message I get.  I never
>had a problem until now... Any clues would greatly be apreciated.
>../sound/lowlevel/miroaci.h:9: #error Compiling a driver that needs
>the ACI-mixer but without ACI-mixer support

Seems pretty self-explanatory to me...

Quote:>make[2]: *** [radio-miropcm20.o] Error 1
>make[2]: Leaving directory `/usr/src/linux/drivers/char'
>make[1]: *** [_modsubdir_char] Error 2
>make[1]: Leaving directory `/usr/src/linux/drivers'
>make: *** [_mod_drivers] Error 2

Compiling the modules aborted with an error, so there are no modules
to install!

I guess you need to enable ACI-mixer support, or DISable the
radio-miropcm20 module.

Hope this helps,

Ellen
--

Ellen Geertsema               "All my life I wanted to be someone;

                                                   -- Jane Wagner

 
 
 

modules not installed when compiling Kernel 2.2.19

Post by Steve Marti » Tue, 02 Oct 2001 06:18:55



> Hi all,
> I installed slackware 8.0 and decided to recompile the kernel in order
> to have a good working config.

> I setup my kernel then ran the usual
> make dep
> make bzImage
> make modules
> make modules_install

Don't know if it's relevant, but it's probably a good idea (and
recommended as well) to do "make clean" right after "make dep"
and before "make bzImage".
 
 
 

modules not installed when compiling Kernel 2.2.19

Post by Dries van Ooste » Tue, 02 Oct 2001 16:31:23




> > Hi all,
> > I installed slackware 8.0 and decided to recompile the kernel in order
> > to have a good working config.

> > I setup my kernel then ran the usual
> > make dep
> > make bzImage
> > make modules
> > make modules_install

> Don't know if it's relevant, but it's probably a good idea (and
> recommended as well) to do "make clean" right after "make dep"
> and before "make bzImage".

I don't know why it's recommended. I really don't see why it's a good
idea. As far as I understand, make clean remove object files. That doesn't
seem like a very good idea to me, since you then have to recompile
everything before linking it, instead of just the object files that are
affected by your change.

Groeten,
Dries

 
 
 

modules not installed when compiling Kernel 2.2.19

Post by Trygve Selme » Tue, 02 Oct 2001 17:40:54





> > > I setup my kernel then ran the usual
> > > make dep
> > > make bzImage
> > > make modules
> > > make modules_install

> > Don't know if it's relevant, but it's probably a good idea (and
> > recommended as well) to do "make clean" right after "make dep"
> > and before "make bzImage".

> I don't know why it's recommended. I really don't see why it's a good
> idea. As far as I understand, make clean remove object files. That doesn't
> seem like a very good idea to me, since you then have to recompile
> everything before linking it, instead of just the object files that are
> affected by your change.

Your old object files are compiled with your old configuration :-)
If you select a new option and one of your old files need that option,
you
 
 
 

modules not installed when compiling Kernel 2.2.19

Post by Dries van Ooste » Wed, 03 Oct 2001 16:59:08



> > I don't know why it's recommended. I really don't see why it's a good
> > idea. As far as I understand, make clean remove object files. That doesn't
> > seem like a very good idea to me, since you then have to recompile
> > everything before linking it, instead of just the object files that are
> > affected by your change.

> Your old object files are compiled with your old configuration :-)
> If you select a new option and one of your old files need that option,

then that's where make starts doing it's magic. Make determines which
files needs to be recompiled. If your going to compile everything
everytime, you wouldn't need make. You have done a make dep, this means
that make now knows which file depend on which other files and which
options. Thus, files that have their options changed will be recompiled.

Groeten,
Dries

 
 
 

modules not installed when compiling Kernel 2.2.19

Post by Edoardo Cos » Mon, 08 Oct 2001 03:01:04


A very late answer to your post (was on holiday).

What you say seems perfectly rational except that the whole sound
section was disabled as I have no sound card in my 486 :/

Any clues?  If not I'll try and add "miroaci.h" to the requiered dir
and c what happens...

thx 4 ur answer though!
Ed.


> On 30 Sep 2001 08:29:21 -0700,

> >The following is a print screen of the error message I get.  I never
> >had a problem until now... Any clues would greatly be apreciated.

> >../sound/lowlevel/miroaci.h:9: #error Compiling a driver that needs
> >the ACI-mixer but without ACI-mixer support

> Seems pretty self-explanatory to me...

> >make[2]: *** [radio-miropcm20.o] Error 1
> >make[2]: Leaving directory `/usr/src/linux/drivers/char'
> >make[1]: *** [_modsubdir_char] Error 2
> >make[1]: Leaving directory `/usr/src/linux/drivers'
> >make: *** [_mod_drivers] Error 2

> Compiling the modules aborted with an error, so there are no modules
> to install!

> I guess you need to enable ACI-mixer support, or DISable the
> radio-miropcm20 module.

> Hope this helps,

> Ellen

 
 
 

1. system problem with not used ipv6 module and routing table , alpha machine kernel 2.2.19

hi i have a strange error .
you cant call him really error because i never have an errormsg.

i installed a suse 7.1 alpha( 2.2.19 ) . routing table as usual.
our network has two diffrent segment on one phisicalnetwork, that mean
our router has one phisical interface address which is X.222.111.23
and two gateway address X.222.111.1 and X.222.222.1 .

this problem is sometimes:
(machien on X.222.111.X) i can ping X.222.111.1 but the router can't
ping me. the machine cant ping out of the segment and if i do a
broadcast X.222.222.255 to the other network segment i get the
phisical router address X.222.111.23 .

/var/log/message = eth0: no IPv6 routers present
lsmod =
ipv6 used -1 ( autoclean )
depmod ipv6 =
pci module , isapnp module, usb module
depmod =
Unresolved symbols in /lib/modules/2.2.19/misc/ymfpci.o

i know that i could compile the kernel new or work with ip alias or
delete the ipv6 module , ... i want to know why this happend, that my
machine searchs a IPv6 router.

Regars
mitja

2. Problem with JDK 1.2?

3. 2.2.19 + ide 2.2.19 03252001 patch problem

4. HELP!!!! Need assistance with multihomed Linux box

5. Kernel 2.2.19 and ftp ipmasq module

6. In swapper task - not syncing - MACHINE HALTS!

7. Who had been successful compile kernel 2.2.19 in RH7.1, please read.

8. SCNA Certification - Study Material

9. Compile Kernel 2.2.19 for ip_masq_h323............................

10. more compiling kernel 2.2.19 - please help more!

11. compiling kernel 2.2.19 - please help!

12. system hangs during boot after compiling new kernel (2.2.19)

13. Kernel 2.2.19 compile error !!! (ftap_syms.c)