Very Computer

I have creating partitions for Linux in a second hard drive, as  you can

see here:
     Device    Boot   Begin Start End   Blocks    Id   System
    /dev/hdc1          1     1    261  2096451    6   DOS 16-bit >=32M
    /dev/hdc2         262   262   268  56227+     82   Linux swap
    /dev/hdc3         269   269   527  2080417+   83 Linux native

the Source is the directory " Linux"  in the dos partition  dev/hdc1,
with some disksets:  a1 to a13, ap1, d1, n1 to n9 and x1.

After I have selected  the TARGET (dev/hdc3) , the SOURCE and SELECT
disksets, the setup
start to install A but immediatly send this message:

------------------Selected series not present-----------
Warning:

Can't find a disk series a in the source directory.
Skipping it......

can you help me to solve the problem and start the installation?

Thanks

one thing that you might want to double check is that it really is Linux,
and not linux. the way you would do that is after you mount /dev/hdc1 to
/slack do a
cd /slack
ls -al
and see if it is Linux or linux

hope this helps.

cheers,
Mike