Board index Linux Setup

CDROM on SB16 Terciary Port

CDROM on SB16 Terciary Port

Post by Steve Brow » Fri, 16 Feb 1996 04:00:00





>I have a soney 55e ide/atapi cdrom attached to my sound blaster 16 on
>port 1E8h and irq 11.   How do i tell linux about this setup?
>would this then be hde?
>I have 4 hard drives and linux has no problem with them.
>The kernel is 1.2.something.

Linux (all distributions, all kernels) does not yet recognize the
tertiary and quaternary IDE ports. Somebody please fix this
shortcoming!
 
 
 
Top

1. SB16 CDROM port address

What is the normal CDROM port address for an SB16/Panasonic which has a sound
address at 220? I found that the defaults in the sbpcd.h file (340) don't work
on my system. Any help would be greatly appreciated.

--
Lynn R. Ziegler             Phone: (612) 363-3083

St. John's University       Home Page: http://bingen.cs.csbsju.edu/~lziegler/  
Collegeville, MN 56321      CSB/SJU Home Page: http://www.csbsju.edu/

2. HELP---bad BOOT floppy!

3. cdrom on sb16 pnp ide port

4. Character OSRV much slower than SCO unix 3.2v4.2

5. Configuring ide cdrom attached to SB16 IDE port

6. changing partition size

7. cdrom on sb16 pnp ide port

8. pgcl-2.5.64-[345]

9. SCSI CDROM on SB16/SCSI-2

10. Install Problems: RH 5.2, SB16 & Creative 200F CDROM

11. WARP and CDROMs on SB16/SCSI

12. CD420F cdrom with SB16 PnP

13. Install OP/ODT from CDRom on SB16 (SCSI-2) ??????


All times are UTC
Board index