Very Computer

I am trying ot get Caldera Network Desktop to work on my machine at
work.  It has a 2940 and 3c590 card that isn't recognized.  I would
like to get this configuration to work to make testing easier.

If this isn't possible, I will grab some older scsi and ethernet cards
that may be more paletable to caldera.

BTW, using  this in a Netware enviroment.

Wes Szumera
Plant Engineer
Eagle Picher Trim Divsion

I have three systems here running Linux with Adaptec 2940 SCSI controller
cards with no problems... I did have problems tryin to use a 3c59x but had
no problems with the 3c509b NIC. If you can get a hold of a 3c509 or a good
NE2000 card I would suggest either one as I have not had any problems with
either model of NIC.
        Jeremy

Quote:>I am trying ot get Caldera Network Desktop to work on my machine at
>work.  It has a 2940 and 3c590 card that isn't recognized.  I would
>like to get this configuration to work to make testing easier.

>If this isn't possible, I will grab some older scsi and ethernet cards
>that may be more paletable to caldera.

>BTW, using  this in a Netware enviroment.

>Wes Szumera
>Plant Engineer
>Eagle Picher Trim Divsion