Compiling kernel 2.0.30 problems.

Compiling kernel 2.0.30 problems.

Post by VanderBi » Wed, 04 Jun 1997 04:00:00



Hello all,

I want to make my linux machine (RedHat, kernel 2.0.18) a router for
our local lan to the internet. So I figured out I had to recompile the
kernel to include ip_masquerading. I downloaded the
kernel-2.0.30-2.src.rpm file, ran it through rpm and tarred into the
/usr/src directory. Next I did "make config"  "make dep" and "make
clean" (do you regocnize which HOWTO I follow here?) On the final
part, the "make zImage" it goes wrong. After a lot of messages the
compiling process gets stuck with the following line:
entering directory /usr/src/linux/driver/block
<some gcc lines>
gcc <-instructions> ide.o ide.c
Compiler gets internal error 11
Leaving directories etcetera.

Anybody seen this before, or know what I have missed before I should
start the compilation?

Any help would be greatly appreciated,

Greeting from Holland,

Gert-Jan van de Bilt

 
 
 

Compiling kernel 2.0.30 problems.

Post by VanderBi » Wed, 04 Jun 1997 04:00:00


Sorry to have bothered the whole community with this trivial (after
seeing 3 postings with exactly the same errors) problem :)

I've taken the advice from other questions, and checked both DEJANEWS
and www.bitwizard.com/sig11 FAQ, which explained exactly what to do.

Greetings from Delft,

Gert-Jan van de Bilt

 
 
 

Compiling kernel 2.0.30 problems.

Post by Fanying Je » Sat, 07 Jun 1997 04:00:00


That is probably some erratic library error, try reinstalling the entire
development kit again, then recompile the kernel.

Good Luck
--
------------------------------------------------------------------
Fanying Jen

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2

mQCNAzNtW98AAAEEANbie32jjO1+Oq9yDbvSooP8ja8cJruZHAUEyzSl6JBYiP0L
jYLZ1C7CMbrFwSIW4eUsnqVXQNBfLCXHsrgu9DeIsT3FG9MhH8DcCPdr6M8n8Mmm
xAHYSzvtQdhObR3o6OD8ZuXF7WfUrTAXfpZVGwfHyW8MIh3kTG1e5pFC2VYZAAUR
tDNGYW55aW5nIEplbiA8ZmFueWluZ0BmYW55aW5nLmVlY3Muc3RldmVucy10ZWNo
LmVkdT4=
=xhzE
-----END PGP PUBLIC KEY BLOCK-----


The Fanying Jen Internet / Campus Server

http://fanying.eecs.stevens-tech.edu/ (For all other users)
http://fjen.usp.stevens-tech.edu/ (For internal Campus users only)
------------------------------------------------------------------

 
 
 

1. HELP: Compiling kernel problem. Kernel 2.0.30

I get the following error when compiling kernele 2.0.30, under slackware
(current kernmel 2.0.29)

make [2]: *** No rule to make target `minix/minix.o' , needed by
`filesystems.a'.  STOP.

make[2]: Leaving directory `/usr/src/linux/fs'
make[1]: ***[first_rule] Error 2
make[1]: Leaving directory `/usr/src/linux/fs'
make: ***[linuxsubdirs] Error 2

  How can I fix this? thanks

                                Xavier

2. Help! ASUS SC200 with ASUS XP6NP5 MB

3. Problem compiling Kernel 2.0.30

4. WU-FTPD-2.4 Error : Socket operation on non-socket

5. Cannot compile kernel 2.0.30

6. How do I use an on-board NIC?

7. Can't compile kernel 2.0.30

8. Unable to send mail

9. help: result after compile kernel 2.0.30

10. Re-Compiling Kernel 2.0.30

11. Kernel 2.0.30 parse error when compiling

12. Kernel 2.0.30->2.0.33, some modules don't compile...