Board index Linux Setup

Avance logic ALS 100+ sound/redhat 5.1

Avance logic ALS 100+ sound/redhat 5.1

Post by Christophe MICHE » Fri, 22 Jan 1999 04:00:00



hello world
---------------

    Anyone succeeded in correctly configure IRQ/DMA for Avance logic ALS
100+ sound card with linux ?? What values dit you choose ????

I have tried to put the same values as window's but unsuccessfully.

    This card worked fine with redhat 5.1 on a spacewalker tx Chipset with
an AMD K6 233 but my new IWILL XA100+/AMD K62 350 has made changes to
available irq's and DMA's and I can't figure which ones are the good ones. I
have tried almost every configurations in xconfig without any success.

    Someone has heard about a program that could test available values for
sound cards and /or every ISA/PCI devices hooked onto the motherboard ????

 
 
 
Top

Avance logic ALS 100+ sound/redhat 5.1

Post by Nicolas Kisselhof » Sat, 23 Jan 1999 04:00:00



> hello world
> ---------------

>     Anyone succeeded in correctly configure IRQ/DMA for Avance logic ALS
> 100+ sound card with linux ?? What values dit you choose ????

> I have tried to put the same values as window's but unsuccessfully.

>     This card worked fine with redhat 5.1 on a spacewalker tx Chipset with
> an AMD K6 233 but my new IWILL XA100+/AMD K62 350 has made changes to
> available irq's and DMA's and I can't figure which ones are the good ones. I
> have tried almost every configurations in xconfig without any success.

>     Someone has heard about a program that could test available values for
> sound cards and /or every ISA/PCI devices hooked onto the motherboard ????

Salut Christophe,

le programme dont tu parles n'est pas sndconfig qui est en standard sur
RH 5.1 et 5.2 ?

Nicolas.

 
 
 
Top

1. Avance logic ALS 100+ sound/redhat 5.1

I also have a ALS100 sound card.
I configured it as following

extract of /etc/conf.modules :
alias sound sb
alias midi opl3
options opl3 io=0x388
options sb io=0x220 irq=5 dma=1 dma16=0 mpu_io=0x300

during kernel compilation I said that it 's a soundblaster compatible
and that I wanted a generic opl2/3 driver

It doesn't work too bad but I still have two problems :
1) /var/log/messages have a message
   Sep  6 13:53:46 localhost kernel: SB16: Bad or missing 16 bit DMA
channel

2) It is slow, playing xboing -sound causes hashed game

Hope it helps

------------------  Posted via CNET Linux Help  ------------------
                    http://www.searchlinux.com

2. test command in bourne shell

3. Avance logic ALS 100+/redhat 5.1 snd config

4. ext2 root inode .i_blocks forced to 2?

5. Avance Logic ALS-4000 Sound card and Suse 6.3

6. Larger text (possible?)

7. Avance logic ALS 300 PCI config. for mdk6

8. how to interpret route command

9. PCI avance logic ALS 300 soundcard config with mandrake 6.0

10. Sound problem with Avance Logic Sound 007

11. Avance Logic ALS100 Sound Card DMA8Bit!

12. avance logic sound card

13. Avance Logic Sound Card


All times are UTC
Board index