Setup TV-Card and additional Video-In on Video Card

by Sven Templ » Sat, 17 May 2003 23:41:29

Hello *,

I used a Hauppauge WinTV PCI with bttv. Now I have installed a new
video card (NVIDIA GF4) with an additional video-in port. Without X11
bttv/bttvgrab runs perfect. After starting X and run bttvgrab
following error occurs:

/usr/bin/bttvgrab error: Cannot allocate memory (open /dev/bttv)
[14/1]

I think video-in on new video card blocks out the video device. How
should I configure second video device or how can I switch off
video-in on video card.

Thanks in advance,

Sven

Top

1. Programming video card (ATI card w/ s-video & tv-out) Need direction to correct info

Hi,
I hope some people read this and can help me out.

I have a ATI Rage Pro pci video card that has s-video and tv-out. I want
to be able to use the s-video and tv-out on the card. Now, is this down
by the app(like what I find on Video4Linux) or is it in Xfree86?

I want to know if there has been a driver developed which accesses the
s-video and tv-out on the ATI card. If so, a pointer to the source would
be great.

If not, then I would like to know how would I go about to use the
s-video and tv-out. I just need some clarification on if the actual app
would take care of loading up the s-video interface and tv-out interface
or if it is the actual video card driver(Xfree86?).

Thanks for any help in advanced and if it isn't too much trouble, can
you also cc: you rhelp to my e-mail?

Gracias!

2. Unused swap space though many big processes

3. on board video messing with additional video cards

4. loadlin15.zip ftp site?

5. Trident 9680 Video Card vs. Cirrus Login 5430 Video Card

6. Help with my 3Com905-TX

7. video card info - what is the fastest video Card on X?

8. Please help on how to patch ppp for callback

9. AGP video card, TV tuner and capture card

10. mutiple tv tuner cards and video capture cards, help needed

11. TV capture card without video card ?