Very Computer

Hi all,

I'm new to debian and got a tiny problem, launching X on a debian-server. I
installed the needed packages (no problem occurred), configured the X by
xf86config (which created XF86Config) and startet to run startx. I went into
trouble and fixed some small ones (xfonts-pex needed to be installed, unix/:7001
could not be found, so I removed it from the list in XF86Config-4), and now
startx does not mention any further error. It shows up some warnings, but no
error... but... it ends up with "waiting for X server to shut down".

I really don't know what else to do, so I hope for any hint...

Find the Log from startx below.

Thanks and regards.

Marcus

warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFre...@XFree86.Org and patches submitted
to fi...@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jun 13 19:48:06 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Speedo" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi" does not exist.
        Entry deleted from font path.
(**) FontPath set to
"/
us
r/
li
b/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/100dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Rage 128 Pro PF rev 0, Mem @ 0xf4000000/26, 0xf3000000/14,
I/O @ 0xd800/8, BIOS @ 0xf3fe0000/17
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) VESA: driver for VESA chipsets: vesa
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(**) VESA(0): Depth 24, (--) framebuffer bpp 24
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): Manufacturer: GSM  Model: 42ca  Serial#: 16843009
(II) VESA(0): Year: 2000  Week: 13
(II) VESA(0): EDID Version: 1.2
(II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) VESA(0): Sync:  Separate  Composite
(II) VESA(0): Max H-Image Size [cm]: horiz.: 32  vert.: 24
(II) VESA(0): Gamma: 2.83
(II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VESA(0): redX: 0.642 redY: 0.330   greenX: 0.273 greenY: 0.605
(II) VESA(0): blueX: 0.142 blueY: 0.063   whiteX: 0.283 whiteY: 0.298
(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 640x480@72Hz
(II) VESA(0): 640x480@75Hz
(II) VESA(0): 800x600@56Hz
(II) VESA(0): 800x600@60Hz
(II) VESA(0): 800x600@72Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 1024x768@87Hz (interlaced)
(II) VESA(0): 1024x768@60Hz
(II) VESA(0): 1024x768@70Hz
(II) VESA(0): 1024x768@75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported Future Video Modes:
(II) VESA(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) VESA(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) VESA(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) VESA(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 40.6 MHz   Image Size:  310 x 230 mm
(II) VESA(0): h_active: 640  h_sync: 656  h_sync_end 720 h_blank_end 800
h_border: 0
(II) VESA(0): v_active: 480  v_sync: 481  v_sync_end 485 v_blanking: 507
v_border: 0
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 67.5 MHz   Image Size:  310 x 230 mm
(II) VESA(0): h_active: 800  h_sync: 840  h_sync_end 920 h_blank_end 1064
h_border: 0
(II) VESA(0): v_active: 600  v_sync: 601  v_sync_end 606 v_blanking: 634
v_border: 0
(II) VESA(0): Monitor name: CS778DC
(II) VESA(0): Monitor name:
(++) VESA(0): DPI set to (100, 100)
(--) VESA(0): Virtual size is 800x600 (pitch 800)
(**) VESA(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz,
85.1 Hz
(**) VESA(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz,
85.0 Hz
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(--) Depth 24 pixmap format is 24 bpp
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(**) VESA(0): DPMS enabled
(WW) VESA(0): Option "UseFBDev" is not used
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "PS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Protocol: "ImPS/2"
(==) Generic Mouse: Buttons: 3
(**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)

waiting for X server to shut down

--
__________________________________________________________
News suchen, lesen, schreiben mit http://newsgroups.web.de

I think your Debian is missing some needed packages (fonts for example).
Try to add these with apt-get, so for example on my box these packages
are installed:

rc  xf86setup       3.3.6-11potato X server configuration tools
ii  xfig            3.2.3.d-rel-6  Facility for Interactive Generation
ii  xfonts-100dpi   4.1.0-17       100 dpi fonts for X
ii  xfonts-75dpi    4.1.0-17       75 dpi fonts for X
ii  xfonts-base     4.1.0-17       standard fonts for X
ii  xfonts-pex      4.1.0-17       fonts for minimal PEX support in X
ii  xfonts-scalable 4.1.0-17       scalable fonts for X
ii  xfree86-common  4.1.0-17       X Window System (XFree86)
ii  xfs             4.1.0-17       X font server
ii  xserver-xfree86 4.1.0-17       the XFree86 X server

So an "apt-get install xfonts-pex" would install this package on your
system for example. Also, try to use "XFree86 -configure" instead of
"xf86config" as this will try to find your graphic adapter, mouse,
monitor etc. automatically.

Regards, Joerg.