error in file system

error in file system

Post by Fadi Soda » Sun, 26 Apr 1998 04:00:00



hi ppl,

When i start my linux-box, i got the following msg:
-------------------------------------------
Uncompressing Linux...done.
Now booting the Kernel
ide_setup: hdb=cdrom
console:16 point font, 400 scans
console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000f0280
pcibios_init : BIOS32 Service Directory entry at 0xf0210
pcibios_init : PCI BIOS revision 2.10 entry at 0xf0200
Probing PCI hardware.
Calibration delay loop...ok -39.94 BogoMIPS
Memory: 30688k/32768k available (772k kernel code, 384k reserved, 924k data
SwANSEA University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.034
IP Protocols: ICMP, UDP, TCP
checking 386/387 coupling ...ok, fpu using exception 16 error reporting.
checking 'hlt' instruction...ok.

serial driver cersion 4.13 with no serial options enabled
tty00 at 0x03f8 (irq =4) is a 16550A
tty00 at 0x03f8 (irq =3) is a 16550A
PS/2 auiliary pointing device detected -- driver installed.
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date:1994.....
tpqic02: DMA buffers:20 blocks, at address 0x1fde00 (0x1fdc50)
ftape-2.08 960314 for Linux 1.3.70
Ramdisk driver initialized: 16 ramdisks of 4096K size
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide: BM-DMA feature is not enabled (BIOS)
hda: ST51080A,1033MB w/256kB Cache, LBA,CHS=525/64/63
hdb: ATAPI cdrom
ide at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy driver(s): fd0 is 1.44
started kswapd v .4.2.2
FDC 0 is apost-1991 82077
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6>
VFS: Mounted root (ext2 filesystem) readonly.
INIT: Version 2.65f booting
Running /sbin/init.d/boot.
Activating swap-devices in /etc/fstab..
Adding Swap: 50364k swap-space
Running update (bdflush) daemon.
checking file systems
Parallelizing fsck version 1.06 (7-Oct-96)
/dev/hda2 contains a file system errors, check forced.
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: status=0x40 { UncorrectableError }. LBAsect=385922,
sector=18029
end_request: I/O error, dev 03:02, sector 180290
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: status=0x40 { UncorrectableError }. LBAsect=385922,
sector=18029
end_request: I/O error, dev 03:02, sector 180290
Error reading block 90145 (Attempt to read block from filesystem resulted
in short
read) while doing inode scan.

/dev/hda2: UNEXPECTED INCONSISTENC; RUN fsck MANUALLY
(i.e., without -a or -p options)
Loading /etc/default.keytab

fsck failed. Please repair maually and report. The root file system is
currently mounted
read-only. To remount it read-write do:
  bash# mount -n -o remount, rw /
Attention: Only Control-D will reboot the system in this maintanance mode.
shutdown or reboot will not work.

Give root password to login:
-------------------------------------------------------------------

What shall i do?

Thx in advance
fadi

 
 
 

error in file system

Post by fea » Wed, 29 Apr 1998 04:00:00



Quote:>/dev/hda2: UNEXPECTED INCONSISTENC; RUN fsck MANUALLY
>(i.e., without -a or -p options)
>Loading /etc/default.keytab

>fsck failed. Please repair maually and report. The root file system is
>currently mounted
>read-only. To remount it read-write do:
>  bash# mount -n -o remount, rw /
>Attention: Only Control-D will reboot the system in this maintanance mode.
>shutdown or reboot will not work.

>Give root password to login:
>-------------------------------------------------------------------

>What shall i do?

How about doing what it asks you to do? i.e give root password.

-f-

 
 
 

1. Enhanced Filing system - file system like DEC Advanced File system for Linux

    Some time ago I was involved in discussion on this news group regarding the
design of a new file system for Linux.  The main aim is to support dynamic size
changing by adding/removing partitions from the file system at run time without
interrupting processes that are using the file system.  Another major feature is
logging so that a system crash or power failure can be recovered from without
data loss or an excessive amount of time spent running FSCK.

  This project is now going ahead, if you are interested then please load up the
following URL: http://www.virtual.net.au/~rjc/enh-fs.html

Russell Coker

2. Axis 540 print-server / SCO Unix problem

3. "Standard Journaled File System" vs "Large File Enabled Journaled File System"

4. mandrake 8 install

5. Help : Cannot create file system error during installation : linux 7.0 (ULTRA ATA 100 Error ???)

6. bash history and arrow keys?

7. Errors compiling Wingz 1.4 Add-ins (Linux 1.3.99, GCC 2.6)

8. tci under RH 6.0

9. setup.ins error when installing OO in 5.0-REL

10. Netscape plug-ins, helper files, Acrobat etc.

11. Compare file modification date using tcsh built-ins

12. /var file system <==> /usr file system

13. copy umsdos file system to ext2 file system