Graphix error ? Help wanted Plz.

Graphix error ? Help wanted Plz.

Post by Anders ?quis » Mon, 19 Apr 1999 04:00:00



I have this odd ? problem.
There just popups  ansi graphics blinking all over my screen
if  I type clear+<CR> then my screen clears, but its annoying when I reading
text in emacs or vi.
I wonder if there any setup things that I have to do to correct this problem
And in X it works OK in the beginning but after awhile there is all *
or the the graphic don't show correctly....
I've read the Cirrus FAQ and tried all there but I think the problem is
somewhere else due to that in command line... I get this Ansi graphics
exploding all over my screen.

Cirrus Logic 5436 PCI is graphic card, 1MB.

/Anders Oquist

 
 
 

1. plz plz plz help.

it seems that i cannot get my eth0 to come up on my laptop. after reviewing
the boot log i can see that my pcmcia services are working fine and the
correct driver is installed

here is a snip of the boot log

Dec 28 16:11:03 c1319937-a pcmcia: Starting PCMCIA services:
Dec 28 16:11:03 c1319937-a pcmcia:  modules
Dec 28 16:11:03 c1319937-a kernel: Linux PCMCIA Card Services 3.1.19
Dec 28 16:11:03 c1319937-a kernel:   kernel build: 2.2.16-22 #1 Tue Aug 22
16:49:06 EDT 2000
Dec 28 16:11:03 c1319937-a kernel:   options:  [pci] [cardbus] [apm]
Dec 28 16:11:03 c1319937-a kernel: PCI routing table version 1.0 at 0xfbda0
Dec 28 16:11:03 c1319937-a kernel:   00:03.0 -> irq 11
Dec 28 16:11:03 c1319937-a kernel:   00:03.1 -> irq 11
Dec 28 16:11:03 c1319937-a kernel: Intel PCIC probe:
Dec 28 16:11:03 c1319937-a kernel:   TI 1225 rev 01 PCI-to-CardBus at slot
00:03, mem 0x68000000
Dec 28 16:11:03 c1319937-a kernel:     host opts [0]: [ring] [serial pci &
irq] [pci irq 11] [lat 32/32] [bus 32/34]
Dec 28 16:11:03 c1319937-a kernel:     host opts [1]: [ring] [serial pci &
irq] [pci irq 11] [lat 32/32] [bus 35/37]
Dec 28 16:11:03 c1319937-a kernel:     ISA irqs (scanned) = 3,4,7,9,10 PCI
status changes
Dec 28 16:11:03 c1319937-a pcmcia:  cardmgr.
Dec 28 16:11:03 c1319937-a rc: Starting pcmcia:  succeeded
Dec 28 16:11:03 c1319937-a cardmgr[468]: starting, version is 3.1.19
Dec 28 16:11:04 c1319937-a cardmgr[468]: watching 2 sockets
Dec 28 16:11:04 c1319937-a kernel: cs: IO port probe 0x0c00-0x0cff:
excluding 0xcf8-0xcff
Dec 28 16:11:04 c1319937-a kernel: cs: IO port probe 0x0800-0x08ff:
excluding 0x800-0x84f
Dec 28 16:11:04 c1319937-a kernel: cs: IO port probe 0x0100-0x04ff:
excluding 0x280-0x287 0x378-0x37f 0x4d0-0x4d7
Dec 28 16:11:04 c1319937-a kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Dec 28 16:11:04 c1319937-a cardmgr[468]: initializing socket 0
Dec 28 16:11:04 c1319937-a kernel: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
Dec 28 16:11:04 c1319937-a cardmgr[468]: socket 0: 3Com 589 Ethernet
Dec 28 16:11:04 c1319937-a cardmgr[468]: executing: 'modprobe 3c589_cs'
Dec 28 16:11:04 c1319937-a kernel: eth0: 3Com 3c589, io 0x300, irq 3,
hw_addr 00:60:97:CC:CA:9A
Dec 28 16:11:04 c1319937-a kernel:   8K FIFO split 5:3 Rx:Tx, auto xcvr
Dec 28 16:11:04 c1319937-a cardmgr[468]: executing: './network start eth0'
Dec 28 16:11:05 c1319937-a checkpc[480]: Get_local_host: hostname
'c1319937-a.grlnd1.tx.home.com' bad
Dec 28 16:11:05 c1319937-a pumpd[509]: starting at (uptime 0 days, 0:00:41)
Thu Dec 28 16:11:05 2000
Dec 28 16:11:05 c1319937-a lpd[514]: Get_local_host: hostname
'c1319937-a.grlnd1.tx.home.com' bad
Dec 28 16:11:05 c1319937-a lpd: 2000-12-28-16:11:05.467 Get_local_host:
hostname 'c1319937-a.grlnd1.tx.home.com' bad

plz help me with this prob.
many thanks.

2. Motif 2.1, glibc, RH5

3. HELP HELP HELP HELP PLZ

4. System.map vs. /proc/ksyms

5. Plz help- "undefined reference" error in short sample c++ program

6. iptables - newbie fun with port forwarding

7. ipmasqadm errors .. plz help

8. PWD in C?

9. Lilo Error HELP plz??

10. RH 6.1 -- plz help with errors in starting httpd (Apache)

11. Error in SLIP setup -- HELP PLZ!

12. kernel error help plz

13. No directory /home/sysop error response. Plz help.