redhat printtool epson stylus

redhat printtool epson stylus

Post by Simon Duecker » Tue, 30 Sep 1997 04:00:00



Hi all,
I want to use the redhat printtool to configure my epson stylus 800+
printer. But there is no possibility to select epson (only HP,
postscript printer, ...)

--
Regards
Simon Dueckert                  \^ ^/

+---------------------------oOO--(_)----------------------------------+
+ Student of Friedrich Alexander University - Electrical Engeneering  +
+ Mr. Simon Dueckert           | Phone: +49 9131 302040               +
+ Hartmann Street 125          | Fax:   nop                           +

+ web site: http://schizo.hawo.stw.uni-erlangen.de/~snduecke/homepage +
+-----------------------------------Oooo--oOO-------------------------+
                              oooO (   )
                             (   )  ) /
                              \ (  (_/
                               \_)

 
 
 

redhat printtool epson stylus

Post by Sid Boyc » Thu, 02 Oct 1997 04:00:00



> Hi all,
> I want to use the redhat printtool to configure my epson stylus 800+
> printer. But there is no possibility to select epson (only HP,
> postscript printer, ...)

> --
> Regards
> Simon Dueckert                  \^ ^/

        I have the Stylus Color II and it worked with ghostscript-5.01, but
didn't with 5.03. In both cases printtool reported "unsupported type".
As it comes, ghostscript doesn't have stcolor compiled in, so you would
have to add stcolor.dev to the DEVS6 line in unix-gcc.mak and devs.mak,
I don't recall exactly, but the .txt files are quite explicit about what
to do, ghostscript may be your problem.
        There is also support in 5.03 for all the Stylus Color printers, but I
haven't tried it native, I've been using a separate filter and
magicfilter for a long time so I stuck to that at least till I get the
urge to tackle it.
Regards

--
... Sid Boyce...Amdahl(UK)...44-121 422 0375
                   -----------------------------------
Any opinions expressed above are mine and do not necessarily represent
 the opinions or policies of Amdahl Corporation.

 
 
 

1. low print quality with epson stylus 740i and printtool

Hi, I have installed a printer, but the print quality is rather low.
Lines that should be straight, like the vertical bars in `H', are fuzzy.
Is this normal?

(I installed using the redhat printtool program, which managed to
autdetect as /dev/lp0, and have tried both the
"stc740p Stylus Color 740, 720x720Dpi, plain paper" and
"stc740h Stylus Color 740, 1440x720Dpi, ink jet paper" filters.)

Sent via Deja.com http://www.deja.com/
Before you buy.

2. kernel debug

3. Epson Stylus Color 800 on Redhat 4.2

4. We have another WINNER

5. Epson Stylus Color II + Samba 2.0.3 (Redhat 5.9 Linux) = no print

6. Copy from floppy to Dos part ?

7. Epson Stylus color 800, redHat 5.1

8. how to config SuSE 6.1 and RedHat 6.0

9. MacOS X + Redhat 7.2 with Epson Stylus USB via lpr / ghostscript

10. Epson Stylus Color II [printer] in Redhat 5.0

11. Setup - Epson Stylus C40S USB - RedHat 8

12. Howto: print from Redhat 7.2 to Windows 2000 with Epson Stylus C80

13. Epson Stylus Color II with Redhat 4.1 ???