Klyx 0.9.5-1 problem w/ qt...

Klyx 0.9.5-1 problem w/ qt...

Post by Christopher Qual » Tue, 02 Jun 1998 04:00:00



Hello all,

I am trying to install klyx 0.9.5-1, but when
I 'rpm -Uvh' it, it tells me that libqt.so is
missing, but:

schubert.quale % ls -l $QTDIR/lib
total 1148
lrwxrwxrwx   1 root     root           13 Apr 16 19:02 libqt.so ->
libqt.so.1
lrwxrwxrwx   1 root     root           13 Apr 16 19:02 libqt.so.1 ->
libqt.so.1.33
-rwxr-xr-x   1 root     root      1169322 Apr 16 19:02 libqt.so.1.33

schubert.quale % ls -l /usr/lib/libqt*
total 1148
lrwxrwxrwx   1 root     root           13 Apr 16 19:02 libqt.so ->
libqt.so.1
lrwxrwxrwx   1 root     root           13 Apr 16 19:02 libqt.so.1 ->
libqt.so.1.33
-rwxr-xr-x   1 root     root      1169322 Apr 16 19:02 libqt.so.1.33

schubert.quale % rpm -q qt
qt-1.33-1rh5

I tried 'rpm --nodeps ...', and klyx installed, but
I got a segmentation fault when I ran klyx. What am
I missing here?

Sys info: RH5, KDE beta4

Many thanks,

Chris

 
 
 

Klyx 0.9.5-1 problem w/ qt...

Post by Kedar Patanka » Wed, 03 Jun 1998 04:00:00


Hi,

        Did you update the ld.so.conf file to include the $QTDIR/lib in the search
path for the dynamic linker ld?? All you need to do is edit the file
/etc/ld.so.conf and put a line containing the absolute path that
corrosponds to $QTDIR/lib in it (i.e. if $QTDIR is /usr/lib/qt then you
should add a line containing /usr/lib/qt/lib in the /etc/ld.so.conf), and
then run ldconf to make those changes take effect..
        This will tell the dynamic linker to look into the $QTDIR/lib whenever it
receives any requests for dynamic linking..
        Another way is to define the environment variable
LD_LIBRARY_PATH=$QTDIR/lib in your /etc/profile Either ways should do it,
but I will recommend editing the /etc/ld.so.conf and running ldconf way..
        Hope this helps,

        Regards,
        Kedar.



Quote:> Hello all,

> I am trying to install klyx 0.9.5-1, but when
> I 'rpm -Uvh' it, it tells me that libqt.so is
> missing, but:


 
 
 

1. 2.2.18+ adaptec 29160 (scsi0:-1:-1:-1) Referenced SCB 0 not valid

I saw this in earlier kernels but wonder if anyone has a clue.

Dec 31 15:47:47 salsablanca kernel:         SCSISEQ = 0x5a SEQADDR =
0x9 SSTAT0
= 0x10 SSTAT1 = 0x8a
Dec 31 15:47:47 salsablanca kernel: (scsi0:-1:-1:-1) Referenced SCB 0
not valid
during SELTO.
Dec 31 15:47:47 salsablanca kernel:         SCSISEQ = 0x5a SEQADDR =
0x8 SSTAT0
= 0x10 SSTAT1 = 0x8a
Dec 31 15:47:47 salsablanca kernel: scsi : aborting command due to
timeout : pid
 15169, scsi0, channel 0, id 0, lun 0 Write (10) 00 02 14 34 86 00 00
08 00
Dec 31 15:47:47 salsablanca kernel: scsi : aborting command due to
timeout : pid
 15170, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 00 00 4d 00 00
02 00

I am hoping it is not a hardware issue.
I see this also on a 2.2.17 kernel.
The 2.2.18 is monolithic and the 2.2.17 is modular for scsi.
This is a SEAGATE LVD 18gig drive.

2. inetd/pop3d and reverse lookup?

3. Solaris -1.-1.-1

4. What country do I live in?

5. Qt, glibc gcc-2.8.1-1 on RedHat 5.0

6. FTP

7. Difference between -1.0 and -1.0A??

8. Questions From new Unixer

9. Koffice install problem (qt 1.44 - qt 2.0 problem)

10. WindowMaker-0.51.0-1 Install Problems

11. Problems with cnews/SLS 0.99.pl9-1 - Pnews

12. X 3.3.3.1-1/Rendition V1000 Problem

13. X with XFree86 3.3.3-1 problem