RH 6.2 and LG CED-8080B CD-RW

RH 6.2 and LG CED-8080B CD-RW

Post by L. M » Sun, 31 Dec 1899 09:00:00



Hi there,

I got a new PIII 800 with LG CED-8080B. The OS is Redhat 6.2
with kernel upgraded to 2.2.16-3. The problem is that I couldn't
make the LG CD-RW work with cdrecord 1.9.

This is what I did:

1. Kernel config

CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDSCSI=m

CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

2. Load moduls at boot time

Added

options ide-cd ignore=hdb
options ide-cd ignore=hdc
alias scd0 sr_mod
alias scd1 sr_mod
pre-install sg       modprobe ide-scsi
pre-install sr_mod   modprobe ide-scsi
pre-install ide-scsi modprobe ide-cd

in /etc/conf.module.

Added

 append="hdb=ide-scsi hdc=ide-scsi"

in /etc/lilo.conf.

3. After boot,  I checked all modules scsi_mod, sg,
sr_mod, loop, iso9660, and ide-scsi are loaded.
Also all devices /dev/loop0-7 and /dev/sg0-7 are
created by following script provided in CD writing HOWTO

umask -S u=rwx,g=rwx,o-rwx
[ -f loop0 ] \
    || ./MAKEDEV loop \
    || for i in 0 1 2 3 4 5 6 7; do mknod loop$i b 7 $i; done
[ -f sg0 -o -f sga ] \
    || ./MAKEDEV sg \
    || for i in 0 1 2 3 4 5 6 7; do mknod sg$i  c 21 $i; done

4. Then run "cdrecord -scanbus" by root always gives me

Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J?rg Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are
root.

5. Check with dmesg, it seems the cd-rw is alway configured as hdc,
even if I disabled parameter ide-cd in the kernel.

Here is what I saw from dmesg:

hda: SAMSUNG SV2044D, ATA DISK drive
hdb: CD-ROM 50X L, ATAPI CDROM drive
hdc: LG CD-RW CED-8080B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: SAMSUNG SV2044D, 19464MB w/472kB Cache, CHS=2481/255/63
hdb: ATAPI 50X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.10
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  1773.555 MB/sec
   p5_mmx    :  1863.090 MB/sec
   8regs     :  1369.695 MB/sec
   32regs    :   778.383 MB/sec
using fastest function: p5_mmx (1863.090 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096

......

CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
registered device ppp0
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.

I have searched for helpful information on Internet all along, it seems
nothing gives me more than the CD writing HOWTO. Has anyone
configured the LG CD-RW successfully? Please help me. Any input
will be greatly appreciated.

Thanks in advance.

Liang

 
 
 

1. Can LG CD-RW CED-8080B write audio CD's in RedHat 7.2?

Can LG CD-RW CED-8080B write audio CD's in RedHat 7.2?

I'm using the LG CD-RW CED-8080B in a Dell Dimension L700cx
and I currently get errors when I try to write audio CD's.
I'm hoping something in RedHat 7.2 has changed to fix this
problem.

-----=  Posted via Newsfeeds.Com, Uncensored Usenet News  =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
 Check out our new Unlimited Server. No Download or Time Limits!
-----==  Over 80,000 Newsgroups - 19 Different Servers!  ==-----

2. IP masquerading one Linux box behind another

3. LG CED-8080B on RH 6.2

4. Port Forwarding

5. cdrecord and LG CD-RW CED-8080B

6. Blank screen

7. cdrecord 1.10 LG CD-RW CED-8080B audio write won't work

8. Newbie needs help:Gateway mouse setup problem

9. problem w/ LG CED-8080B CD-RW

10. cdrecord and LG CD-RW CED-8080B

11. LG CD-RW CED-8080B problem solution?

12. Problems with cdrdao and LG CD-RW CED-8080B

13. Problems with ATAPI CD-R/RW (LG CED-8080B)