by Hieu Bu » Thu, 20 Jul 1995 04:00:00
Hieu Bui
Web Assist
http://www.webassist.com/webassist/
by Gib Bog » Fri, 21 Jul 1995 04:00:00
I have no personal experience with it, but I have seen many posts to the
effect that the 2940W driver is unusable. Look in comp.os.linux.hardware.
- Gib
1. SCSI Lockup Question (Adaptec & Seagate)
Hi all, I have a PR440 (Providence) Dual PPro Motherboard. Currently
I only have 1 200 MHz process on it with 64 MBs RAM and on the harddrive
end a 9.1 Seagate Medalist SCSI harddrive. I was having random lockups
with the computer and I initally thought it was the processor then when
I went into the SCSI utility bios and did a harddisk check it locks the
computer up when it reaches a point between 40% and 65%. I have double
check termination on the harddrive and made sure the controllers
software controlled terminator was activated. I called up seagates'
automated help line and they suggested changing the way the terminator
gets its power from "It supplies its own" to "It gets it from the bus".
I still get a lockup. Any ideas whats going on here? (Please email if
possible)
Joe Radkowski
3. SCSI Problem with Adaptec 1542 B and Seagate Elite
4. HOWTO->mv /usr /raid5 [under Vinum volume]
5. SCSI timeouts when booting with Adaptec 1542CF/Seagate ST31230N
6. undefined reference to kernel routines
7. Seagate SCSI Drive timeout on a Adaptec 2940 UW
8. DIP
9. SCSI Error: Adaptec aic79xx: "Saw underflow" with Seagate ST336607LW
10. Problem formatting (Adaptec 1542B & Seagate ST11200N) SCSI drive
11. New: Error when compiling SCSI drivers (Adaptec, Seagate etc.)
12. RedHat 4.2 CD, SIIG Ultra SCSI, Seagate Fast Wide 4.3G SCSI HD
13. Adaptec AIC-7860 (was Re: Scsi Adaptec 2940U2W + linux (slackware 3.5))