by Fabrice Medi » Fri, 02 Oct 1998 04:00:00
> Dear experts,
> I have a problem. After installing Linux on the second partition of my
> hard drive I can no longer run NT workstation from the first partition.
> I have an entry for NT in the lilo.conf, lilo starts loading NT, NT loader
> detects 128 Meg of RAM, one CPU and then crashes. In the error message it says
> something about not being able to access boot record.
- Did you configure your BIOS setup correctly ?
- Did you try LOADLIN ?
Fabrice
by Jauvane C. de Oliveir » Sat, 03 Oct 1998 04:00:00
Look for a message with the follwoing header in this same newsgroup:Quote:> I have a problem. After installing Linux on the second partition of my
> hard drive I can no longer run NT workstation from the first partition.
> I have an entry for NT in the lilo.conf, lilo starts loading NT, NT loader
> detects 128 Meg of RAM, one CPU and then crashes. In the error message it says
> something about not being able to access boot record.
Subject: Booting from NT micro HOWTO
Date: Tue, 29 Sep 1998 23:55:21 GMT
Newsgroups: comp.os.linux.setup
Make sure you make the appropriate changes in the instructions to reflect your
instalation. I did that few days ago and everything works GREAT.
Good luck,
---------------------------------------------------------------------
_/ _/ _/ Jauvane Cavalcante de Oliveira
_/ _/ _/ University of Ottawa
_/ _/ _/ _/_/ School of Information Technology & Engineering
_/ _/ _/ _/ Multimedia Communications Research Laboratory
_/ _/ _/_/ _/ Phone:1(613)562-5800 Ext.6248/6243 FAX:562-5175
_/_/_/ _/ _/_/ Canada http://www2.mcrlab.uottawa.ca/~jauvane
---------------------------------------------------------------------
| Bolsista da CAPES - Brasilia/Brasil |
---------------------------------------------------------------------
1. Samba als NT-Dom?nenserver für NT 4.0 Workstations
Hallo an alle!
Ich hab ein Problem mit Samba (aus SuSe-Linux 6.1) als NT-Dom?nenserver fr
NT 4.0 (Service-Pack 4) Workstations.
Ich hab alles probiert, was in den Dokumentationen nachzulesen war, hab mir
verschiedenes aus dem Internet geholt; alles umsonst. Es funktioniert das
mit dem "Encrypt Password" nicht (auch nicht mit dem Regestry-Eintrag), aber
auch ohne dem kann ich mich nicht an der Dom?ne anmelden.
Wer kann mir eine A bis Z Anleitung geben, oder empfehlen?
Gru?
Christian
3. : Install free X-Windows server on Windows NT Workstation 4.0
5. SAMBA cannot connect with WIN NT 4.0 WORKSTATION
6. Fix modular ide unresolved dependences
7. NT Workstation 4.0 != Web Server
8. run web server behine router
9. NT 4.0 going from Workstation to Server
10. NT Workstation 4.0: Bad News for Web Servers
11. Linux and NT Workstation 4.0
12. installing linux on a networked nt 4.0 workstation with novel netware..
13. Samba and Windows NT Workstation 4.0