Very Computer

> Hi-

> Am attempting to dial into my ISP with DIP.  The provider uses PPP.  Not sure how
> this parameter is passed through dip.  Also uses VJ compression.  Here is sample
> dip file for anyone that could help:

> get $local 204.157.172.153
> get $remote 204.157.172.253
> get $mtu 1500 (should be mru??)
> port ttyS1
> speed 38400
> reset
> wait OK 1
> send ATZ1
> dial 757-3571
> wait connect 30
> sleep 3
> send /r/n/r/n
> login:
> wait OK 1
> send XXXXX/n
> password:
> wit OK 1
> send XXXXX/n

> The prompts that my provider offers are:

> connect 28800/arq/lapm/v42bis
> login:
> password:
> ppp session from (204.157.172.253) to 204.157.172.153 beginning

> After the password is passed through the dip script I get lost as to what should
> be included.  The existing script times out.  I can dial and get the modem to
> negotiate.  Any help would be greatly appreciated.

> Hi-

> Am attempting to dial into my ISP with DIP.  The provider uses PPP.  Not sure how
> this parameter is passed through dip.  Also uses VJ compression.  Here is sample
> dip file for anyone that could help:

> get $local 204.157.172.153
> get $remote 204.157.172.253
> get $mtu 1500 (should be mru??)
> port ttyS1
> speed 38400
> reset
> wait OK 1
> send ATZ1
> dial 757-3571
> wait connect 30
> sleep 3
> send /r/n/r/n
> login:
> wait OK 1
> send XXXXX/n
> password:
> wit OK 1
> send XXXXX/n

> The prompts that my provider offers are:

> connect 28800/arq/lapm/v42bis
> login:
> password:
> ppp session from (204.157.172.253) to 204.157.172.153 beginning

> After the password is passed through the dip script I get lost as to what should
> be included.  The existing script times out.  I can dial and get the modem to
> negotiate.  Any help would be greatly appreciated.

> > Hi-

> > Am attempting to dial into my ISP with DIP.  The provider uses PPP.  Not sure how
> > this parameter is passed through dip.  Also uses VJ compression.  Here is sample
> > dip file for anyone that could help:

> > get $local 204.157.172.153
> > get $remote 204.157.172.253
> > get $mtu 1500 (should be mru??)
> > port ttyS1
> > speed 38400
> > reset
> > wait OK 1
> > send ATZ1
> > dial 757-3571
> > wait connect 30
> > sleep 3
> > send /r/n/r/n
> > login:
> > wait OK 1
> > send XXXXX/n
> > password:
> > wit OK 1
> > send XXXXX/n

> > The prompts that my provider offers are:

> > connect 28800/arq/lapm/v42bis
> > login:
> > password:
> > ppp session from (204.157.172.253) to 204.157.172.153 beginning

> > After the password is passed through the dip script I get lost as to what should
> > be included.  The existing script times out.  I can dial and get the modem to
> > negotiate.  Any help would be greatly appreciated.

> I have yet to get ppp or dip up with a script, however from the hundreds of
> pages I've read and the HOWTO's that I've come across, they say that you
> can't run ppp through dip.

> Look up the HOWTO's in the Linux Documentation Project.  they have a HOWTO
> on Net-2 and PPP and they might help.
> --
>                        \\|//
> //===================  (0-0)  ======================================//


> // _________) / /__  \/ /__                                         //
> // If you are not part of the solution,      "Phase diagrams are    //
> // you are part of the problem (or maybe      your friend"          //
> // a colloidal suspension or a                  --Brian Hales Ph.D. //
>             // precipitant).
>     //
> //==================================================================//