Where should I start? I want linux.

Where should I start? I want linux.

Post by Mark Be » Thu, 22 May 1997 04:00:00



        I want to install linux and Win 95 on my p-100.  I will be
starting from a formatted HD.  Which do I install first?  What copy of
linux should I get?  And where?

        I'm looking to use linux mainly for learning unix.  I would like
to set it up as a gateway so windows pcs on my network can share one
modem.

        Where is a good place to learn more about linux?

 
 
 

Where should I start? I want linux.

Post by Christopher Croughto » Sat, 24 May 1997 04:00:00


| Another nice reference site is www.geek-girl.com/unix

That's http://www.geek-girl.com/unix.html - if you forget the .html
bit then it assumes it's a directory (which it isn't).  Fortunately
it's one of the sites where the home page is actually in the root,
so if you delete the 'unix.html' part you find out a load of other
stuff as well.

Thanks for pointing that site out...

| , which has a
| lot of info about UNIX in general.  If you are interested in the
| philosophy behind linux, check out the Free Software Foundation at
| www.fsf.org.

Which is really the Master Site From Which All Else Derives(tm).
(Depending who you taslk to, of course...)

Chris C

 
 
 

Where should I start? I want linux.

Post by PC » Mon, 26 May 1997 04:00:00



Quote:

>        I want to install linux and Win 95 on my p-100.  I will be
>starting from a formatted HD.  Which do I install first?  What copy of
>linux should I get?  And where?

>        I'm looking to use linux mainly for learning unix.  I would like
>to set it up as a gateway so windows pcs on my network can share one
>modem.

>        Where is a good place to learn more about linux?

Mark

I can help you a little. I'm new to linux also and I know the frustrations
of getting it going and learning to control it  First your DOS/Win95 must reside
on the first partition  DOS will only boot from the 1st partition. A program called
LILO will assist you in booting and setting the active flags on partitions.
I also understand there are many additional multi boot programs on the market

Distributions are everywhere. I am finding Redhat and Slackware seem to be very popular.
Boot and root disks are found many places for downloading. and kernels are popping
everywhere Go to a book store and buy a good thick beginner book on linux that includes a
couple distributions on CD.

I hope this helps you. If you need more specific info  i'll try to help if I can


p.s. I found http://www.ucb.edu.bz/linux-info also try http://sunsite.unc.edu/LDP/HOWTO

 
 
 

Where should I start? I want linux.

Post by PC » Mon, 26 May 1997 04:00:00



Quote:

>        I want to install linux and Win 95 on my p-100.  I will be
>starting from a formatted HD.  Which do I install first?  What copy of
>linux should I get?  And where?

>        I'm looking to use linux mainly for learning unix.  I would like
>to set it up as a gateway so windows pcs on my network can share one
>modem.

>        Where is a good place to learn more about linux?

Mark
I can help you a little. I'm new to liNux also and I know the frustrations
of getting it going and learning to control it  First your DOS/Win95 must reside
on the first partition  DOS will only boot from the 1st partition. A program called
LILO will assist you in booting and setting the active flags on partitions.  
I also understand there are many additional multi boot programs on the market

Distributions are everywhere. I am finding Redhat and Slackware seem to be very popular.
Boot and root disks are found many places for downloading. and kernels are popping
everywhere Go to a book store and buy a good thick beginner book on linux that includes a
couple distributions on CD.

I hope this helps you.  

p.s. I found http://www.ucb.edu.bz/linux-info also try http://sunsite.unc.edu/LDP/HOWTO

 
 
 

Where should I start? I want linux.

Post by Marcus » Tue, 27 May 1997 04:00:00



>         I want to install linux and Win 95 on my p-100.  I will be
> starting from a formatted HD.  Which do I install first?  What copy of
> linux should I get?  And where?

>         I'm looking to use linux mainly for learning unix.  I would like
> to set it up as a gateway so windows pcs on my network can share one
> modem.

>         Where is a good place to learn more about linux?

if you want user friendly, get redhat linux or if you want, debian these
can be bought from most large computer software stores in capital cities
or ones near universities, the suggestions in the other Re:'s explain
the rest
 
 
 

Where should I start? I want linux.

Post by root of all evi » Thu, 29 May 1997 04:00:00




> >        I want to install linux and Win 95 on my p-100.  I will be
> >starting from a formatted HD.  Which do I install first?  What copy of
> >linux should I get?  And where?

> >        I'm looking to use linux mainly for learning unix.  I would like
> >to set it up as a gateway so windows pcs on my network can share one
> >modem.

> >        Where is a good place to learn more about linux?

> Mark

> I can help you a little. I'm new to linux also and I know the frustrations
> of getting it going and learning to control it  First your DOS/Win95 must reside
> on the first partition  DOS will only boot from the 1st partition. A program called

[ snip ]

> p.s. I found http://www.ucb.edu.bz/linux-info also try http://sunsite.unc.edu/LDP/HOWTO

i would like to make one minor correction here. dos/win95 can boot from
ANY partition as long as it is a PRIMARY partition and not a logical
or extended partition. i had windows 95 on my third partition and it
worked just fine... i have since deleted the windows part and left only
the dos part of windows 95.

i wrote this merely to clear up any misconceptions, not to be rude or
anything silly like that. :)

 
 
 

Where should I start? I want linux.

Post by Colin Smi » Fri, 30 May 1997 04:00:00





Quote:

>>        I want to install linux and Win 95 on my p-100.  I will be
>>starting from a formatted HD.  Which do I install first?  What copy of
>>linux should I get?  And where?

>>        I'm looking to use linux mainly for learning unix.  I would like
>>to set it up as a gateway so windows pcs on my network can share one
>>modem.

>>        Where is a good place to learn more about linux?

Linux documentation project is a good place to start:

http://sunsite.unc.edu/mdw/linux.html

Go for RedHat 4.2 or Caldera if you are a beginner. Slackware is really for more
advanced users that want more hands on with the system.

http://www.redhat.com
http://www/caldera.com

--
Archeus Free FRPG - http://www.geocities.com/Area51/3002/

My opinions are completely my own, bought and paid for.

 
 
 

Where should I start? I want linux.

Post by David Welto » Fri, 30 May 1997 04:00:00



> >>        Where is a good place to learn more about linux?

> Linux documentation project is a good place to start:

> http://sunsite.unc.edu/mdw/linux.html

> Go for RedHat 4.2 or Caldera if you are a beginner. Slackware is really for more
> advanced users that want more hands on with the system.

And Debian is for those clued in enough to know there are 3 major,
free distributions, as well as others with significant followings like
Caldera and SUSE :P

Ciao:-)
--
David Welton  

Se quest'email e` in Italiano, mi dispiace per gli errori:-) FORZA PANTANI!
                         --Debian GNU/Linux--

 
 
 

Where should I start? I want linux.

Post by David Welto » Fri, 30 May 1997 04:00:00



> >>        Where is a good place to learn more about linux?

> Linux documentation project is a good place to start:

> http://sunsite.unc.edu/mdw/linux.html

> Go for RedHat 4.2 or Caldera if you are a beginner. Slackware is really for more
> advanced users that want more hands on with the system.

And Debian is for those clued in enough to know there are 3 major,
free distributions, as well as others with significant followings like
Caldera and SUSE :P

Ciao:-)
--
David Welton  

Se quest'email e` in Italiano, mi dispiace per gli errori:-) FORZA PANTANI!
                         --Debian GNU/Linux--

 
 
 

Where should I start? I want linux.

Post by Colin Smi » Fri, 30 May 1997 04:00:00





Quote:

>>        I want to install linux and Win 95 on my p-100.  I will be
>>starting from a formatted HD.  Which do I install first?  What copy of
>>linux should I get?  And where?

>>        I'm looking to use linux mainly for learning unix.  I would like
>>to set it up as a gateway so windows pcs on my network can share one
>>modem.

>>        Where is a good place to learn more about linux?

Linux documentation project is a good place to start:

http://sunsite.unc.edu/mdw/linux.html

Go for RedHat 4.2 or Caldera if you are a beginner. Slackware is really for more
advanced users that want more hands on with the system.

http://www.redhat.com
http://www/caldera.com

--
Archeus Free FRPG - http://www.geocities.com/Area51/3002/

My opinions are completely my own, bought and paid for.

 
 
 

Where should I start? I want linux.

Post by Tony Gonzale » Sat, 07 Jun 1997 04:00:00


The Unifix distribution is rather quick and easy to set up.  It
allows you to run a full unix system on as little as 30 megs through
the use of their live file system CD.  I've been using linux for a
while but I like this because I can take the CD to work or to another
computer and install it on a small partition and nobody would hardly
know it's there yet I'd have a full unix distribution at my
disposal.   This would also work well for someone just getting
familiar with the system....also of course you can install the entire CD
distribution on your hard drive if you have the space and inclination
to do so.

You can find more information at: http://www.unifix.de/index.html
                                  http://www.lsl.com/catalog.html

This is the only distribution that can install live cdrom file system in
a serious or fully functional way allowing you to get the real
thing without putting in a lot of resources (you can even install the
whole thing in a dos directory...so I've read, but I wouldn't...unix
for the PC is here to stay)

-Tony

.   .   .   .  . . . . . . . . ._______________________________________.

                               |_____________|___ Southern California _|

 
 
 

Where should I start? I want linux.

Post by D.D. Elli » Sun, 08 Jun 1997 04:00:00



> The Unifix distribution is rather quick and easy to set up.  It
> allows you to run a full unix system on as little as 30 megs through
> the use of their live file system CD.  I've been using linux for a
> while but I like this because I can take the CD to work or to another
> computer and install it on a small partition and nobody would hardly
> know it's there yet I'd have a full unix distribution at my
> disposal.   This would also work well for someone just getting
> familiar with the system....also of course you can install the entire CD
> distribution on your hard drive if you have the space and inclination
> to do so.

> You can find more information at: http://www.unifix.de/index.html
>                                   http://www.lsl.com/catalog.html

> This is the only distribution that can install live cdrom file system in
> a serious or fully functional way allowing you to get the real
> thing without putting in a lot of resources (you can even install the
> whole thing in a dos directory...so I've read, but I wouldn't...unix
> for the PC is here to stay)

> -Tony

> .   .   .   .  . . . . . . . . ._______________________________________.

>                                |_____________|___ Southern California _|

Actually, Slackware does the same thing, and has been doing it for a
long time now. I installed Slackware via the live CD and used it for
several weeks before I was able to install a larger harddrive and do a
full installation.
   Look at the options from the setup menu and it will guide you through
it.

HTH

D.D. Ellis

 
 
 

Where should I start? I want linux.

Post by Tony Gonzale » Mon, 09 Jun 1997 04:00:00


You mean you can install a full and fully configurable system with minimal
space on the hard drive - the bulk of the system being on the CDROM?
Also, I assume you can install any programs not on the cdrom on the
hard drive as part of the system.  Redhat 3.1 had a live file system
which booted off two floppies and used a ram disk as a root file
system so nothing was really configurable in a permanent way, and now
with their latest version they said they stopped supporting the live
file system.  I know slackware had one but no one had ever told me
anything about it.  A while back I asked in a newsgroup what people
thought was the best live file system and the only response I got was
Unifix.  I looked at the new Slackware Unleashed
book and didn't see anything about a "live file system" in the index.

-Tony


: >
: > The Unifix distribution is rather quick and easy to set up.  It
: > allows you to run a full unix system on as little as 30 megs through
: > the use of their live file system CD.  I've been using linux for a
: > while but I like this because I can take the CD to work or to another
: > computer and install it on a small partition and nobody would hardly
: > know it's there yet I'd have a full unix distribution at my
: > disposal.   This would also work well for someone just getting
: > familiar with the system....also of course you can install the entire CD
: > distribution on your hard drive if you have the space and inclination
: > to do so.
: >
: > You can find more information at: http://www.unifix.de/index.html
: >                                   http://www.lsl.com/catalog.html
: >
: > This is the only distribution that can install live cdrom file system in
: > a serious or fully functional way allowing you to get the real
: > thing without putting in a lot of resources (you can even install the
: > whole thing in a dos directory...so I've read, but I wouldn't...unix
: > for the PC is here to stay)
: >
: > -Tony
: >
: > .   .   .   .  . . . . . . . . ._______________________________________.

: >                                |_____________|___ Southern California _|

: Actually, Slackware does the same thing, and has been doing it for a
: long time now. I installed Slackware via the live CD and used it for
: several weeks before I was able to install a larger harddrive and do a
: full installation.
:    Look at the options from the setup menu and it will guide you through
: it.

: HTH

: D.D. Ellis

 
 
 

Where should I start? I want linux.

Post by Turb » Tue, 24 Jun 1997 04:00:00


: >
: > The Unifix distribution is rather quick and easy to set up.  It
: > allows you to run a full unix system on as little as 30 megs through
: > the use of their live file system CD.  I've been using linux for a
: > while but I like this because I can take the CD to work or to another
: > computer and install it on a small partition and nobody would hardly
: > know it's there yet I'd have a full unix distribution at my
: > disposal.   This would also work well for someone just getting
: > familiar with the system....also of course you can install the entire CD
: > distribution on your hard drive if you have the space and inclination
: > to do so.
: >
: > You can find more information at: http://www.unifix.de/index.html
: >                                   http://www.lsl.com/catalog.html
: >
: > This is the only distribution that can install live cdrom file system in
: > a serious or fully functional way allowing you to get the real
: > thing without putting in a lot of resources (you can even install the
: > whole thing in a dos directory...so I've read, but I wouldn't...unix
: > for the PC is here to stay)
: >
: > -Tony
: >
: > .   .   .   .  . . . . . . . . ._______________________________________.

: >                                |_____________|___ Southern California _|

: Actually, Slackware does the same thing, and has been doing it for a
: long time now. I installed Slackware via the live CD and used it for
: several weeks before I was able to install a larger harddrive and do a
: full installation.
:    Look at the options from the setup menu and it will guide you through
: it.

: HTH

: D.D. Ellis

All you need you can find at http://www.linux.org

Turbo.

 
 
 

1. newbie:wants to know "Embedded Linux" right from the start.

Hello all,
Iam a student of computer engineering and iam planning to take a seminar on
"Linux in Embedded Systems".I just went thro some of the basic topics , like
why Linux is used in embedded systems .Now what i really want to know is
:How this is done right from the scratch .I have so far found no materials
regarding the 'actual happenings' in the embedded linux world.I want to know
things like:

*How the linux kernel is changed to suit an embedded device, i mean the
technical details.
*Is there any online resource library on 'Linux in Embedded Systems'?In the
sites that i have so far browsed, i have read things like 'why linux is used
in ES','names of many Embedded Linux's' etc...but no materials on 'how this
is done'.

Hope you got some ieda of what i want.Please pardon my ignorance as i dont
have any hard copies on this topic and i solely have to depend on this NG to
find all the answers.

Thanking you all
-Vish-

2. Dual-booting from different disks?

3. Starting FreeBSD 4.0 with Linux or starting Linux with FreeBSD

4. Linux get Windows 95 Interface!!

5. LOCAL/WANTED: Michigan: Linux Speaker Wanted

6. MetroX vs. XFree (input requested)

7. X can start by startx, but when started automatically after linux is loaded,it hangs

8. LD_PPRELOAD (2)

9. How do I start X automatically when I start Linux???

10. start X when starting linux

11. XWindows starts and starts and starts!!!

12. Help wanted with starting an anon ftp site

13. New user, wanting to start