Recompiling kernel (2.0.0->2.0.24 w/SB AWE 32) problem

Recompiling kernel (2.0.0->2.0.24 w/SB AWE 32) problem

Post by Jason Ahre » Fri, 08 Nov 1996 04:00:00



I am attemptint to recompile my kernel.

Currently I have Slackware 3.1 installed (kernel 2.0.0) and am trying
to compile 2.0.24

My problem comes with my soundcard (SB AWE 32). If I compile without
the sound card everything works fine.

My hardware is a Pentium 100, Triton Chipset MB (PnP bios), PCI video
(matrox) ATAPI CDRom, 2HD (Linux on second partition second HD) system
with an SB AWE 32 card (PnP).

I'm told that "You will need to configure the sound driver with
CONFIG_AUDIO option." Looking through the documentation directory I
found the file that details CONFIG_AUDIO, but there are no
instructions that I found on how to actually use it.

The complete output from my compile follows. Any help is GREATLY
appreciated.

Jason

The (full) output when I appempt to compile is this:

# make zdisk
dnsdomainname: Host name lookup failure
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes
-O2 -fomit-frame-pointer -fno-strength-reduce -pipe -m486
-malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586
-DUTS_MACHINE='"i386"' -c -o init/version.o init/version.c
set -e; for i in kernel drivers mm fs net ipc lib arch/i386/kernel
arch/i386/mm arch/i386/lib; do make -C $i; done
make[1]: Entering directory `/usr/src/linux-2.0.24/kernel'
make all_targets
make[2]: Entering directory `/usr/src/linux-2.0.24/kernel'
make[2]: Nothing to be done for `all_targets'.
make[2]: Leaving directory `/usr/src/linux-2.0.24/kernel'
make[1]: Leaving directory `/usr/src/linux-2.0.24/kernel'
make[1]: Entering directory `/usr/src/linux-2.0.24/drivers'
set -e; for i in block char net  pci sound; do make -C $i; done
make[2]: Entering directory `/usr/src/linux-2.0.24/drivers/block'
make all_targets
make[3]: Entering directory `/usr/src/linux-2.0.24/drivers/block'
make[3]: Nothing to be done for `all_targets'.
make[3]: Leaving directory `/usr/src/linux-2.0.24/drivers/block'
make[2]: Leaving directory `/usr/src/linux-2.0.24/drivers/block'
make[2]: Entering directory `/usr/src/linux-2.0.24/drivers/char'
make all_targets
make[3]: Entering directory `/usr/src/linux-2.0.24/drivers/char'
make[3]: Nothing to be done for `all_targets'.
make[3]: Leaving directory `/usr/src/linux-2.0.24/drivers/char'
make[2]: Leaving directory `/usr/src/linux-2.0.24/drivers/char'
make[2]: Entering directory `/usr/src/linux-2.0.24/drivers/net'
make all_targets
make[3]: Entering directory `/usr/src/linux-2.0.24/drivers/net'
make[3]: Nothing to be done for `all_targets'.
make[3]: Leaving directory `/usr/src/linux-2.0.24/drivers/net'
make[2]: Leaving directory `/usr/src/linux-2.0.24/drivers/net'
make[2]: Entering directory `/usr/src/linux-2.0.24/drivers/pci'
make all_targets
make[3]: Entering directory `/usr/src/linux-2.0.24/drivers/pci'
make[3]: Nothing to be done for `all_targets'.
make[3]: Leaving directory `/usr/src/linux-2.0.24/drivers/pci'
make[2]: Leaving directory `/usr/src/linux-2.0.24/drivers/pci'
make[2]: Entering directory `/usr/src/linux-2.0.24/drivers/sound'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes
-O2 -fomit-frame-pointer -fno-strength-reduce -pipe -m486
-malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586  -c -o
sb_common.o sb_common.c
sb_common.c:21: #error You will need to configure the sound driver
with CONFIG_AUDIO option.
sb_common.c:266: warning: `sb16_set_mpu_port' defined but not used
make[2]: *** [sb_common.o] Error 1
make[2]: Leaving directory `/usr/src/linux-2.0.24/drivers/sound'
make[1]: *** [sub_dirs] Error 2
make[1]: Leaving directory `/usr/src/linux-2.0.24/drivers'
make: *** [linuxsubdirs] Error 2

 
 
 

1. SB 16 / SB AWE 32 Question

Hello!

I have a question about the Soundblaster AWE-32.
The Sound-Howto says that the AWE-32 and the SB16-ASP is not supported
in Linux. I know that the SB16-ASP runs without ASP support, as a plain
SB16. Is the SB AWE-32 not supported at all, or supported as a plain
SB16. CL says that the AWE-32 is compatibel with SB16. Is this true?
Can I use a AWE-32 with the SB16 driver or is it not supported at all.

Thanx
Marius

--
############################################################################
#   Marius Heuler  #   Studentenwohnheim Ferdinandeum  -  Kellerzimmer     #
#                  #   Schloerstrasse 2                -  97074 Wuerzburg  #
# Computer Science #-------------------------------------------------------#

#      Germany     #   phone : + (49) 931 - 81412  |  + (49) 9384 - 1045   #
############################################################################

2. FreeBSD and NUT 0.44.1

3. Linux Kernel 1.3.41+SB AWE 32=NO SOUND

4. Disabled rpcbind, console locks?

5. SB AWE 32 problem...

6. Documentation for WD7000ASC SCSI Card

7. /dev/audio problems w/ SB 32 pnp AWE...

8. file update notification

9. SB 16 AWE 32 PnP CD-ROM workaround problem solved!

10. Mitsumi Cd-ROM / Sb-Awe 32 Problems !

11. SB 64 AWE not detected after kernel recompile

12. Sound Card Woes (AWE-32)<<HELP!!>>

13. Using a Mitsumi 4X CDROM on a SB AWE 32