execute ProC leads to core dump

execute ProC leads to core dump

Post by Dag Wahlber » Thu, 13 Nov 1997 04:00:00



Hi,

I have a problem w ProC, it crashes for any input:

 $ touch foo
 $ proc iname=foo

 Pro*C/C++: Release 2.2.2.0.0 - Production on Wed Nov 12 13:39:35 1997

 Copyright (c) Oracle Corporation 1979, 1996.  All rights reserved.

 System default option values taken from:
/u1/home/dba/oracle/732/precomp/admin/pcscfg.h

 Segmentation Fault - core dumped
 $

Just 'proc' works fine, greets w banner. Oracle and other tools work
fine. Tried rebuilding proc, no change.
Any ideas what can be wrong? Something in the environment; env, path?

Server: 7.3.2.3.0
OS: Solaris 2.5.1

Regards,

/Dag W

 
 
 

execute ProC leads to core dump

Post by John Stran » Wed, 19 Nov 1997 04:00:00


Create the smallest program you can with a
        select 'X' from dual;
and see if it still core's

: Hi,

: I have a problem w ProC, it crashes for any input:

:  $ touch foo
:  $ proc iname=foo

:  Pro*C/C++: Release 2.2.2.0.0 - Production on Wed Nov 12 13:39:35 1997

:  Copyright (c) Oracle Corporation 1979, 1996.  All rights reserved.

:  System default option values taken from:
: /u1/home/dba/oracle/732/precomp/admin/pcscfg.h

:  Segmentation Fault - core dumped
:  $

: Just 'proc' works fine, greets w banner. Oracle and other tools work
: fine. Tried rebuilding proc, no change.
: Any ideas what can be wrong? Something in the environment; env, path?

: Server: 7.3.2.3.0
: OS: Solaris 2.5.1

: Regards,

: /Dag W

--
This posting represents the personal opinions of the author. It is not the
official opinion or policy of the author's employer. Warranty expired when you
opened this article and I will not be responsible for its contents or use.

 
 
 

execute ProC leads to core dump

Post by Craig W. Shave » Wed, 19 Nov 1997 04:00:00



> Hi,

> I have a problem w ProC, it crashes for any input:

>  $ touch foo
>  $ proc iname=foo

>  Pro*C/C++: Release 2.2.2.0.0 - Production on Wed Nov 12 13:39:35 1997

>  Copyright (c) Oracle Corporation 1979, 1996.  All rights reserved.

>  System default option values taken from:
> /u1/home/dba/oracle/732/precomp/admin/pcscfg.h

>  Segmentation Fault - core dumped
>  $

> Just 'proc' works fine, greets w banner. Oracle and other tools work
> fine. Tried rebuilding proc, no change.
> Any ideas what can be wrong? Something in the environment; env, path?

> Server: 7.3.2.3.0
> OS: Solaris 2.5.1

> Regards,

> /Dag W

How was Proc installed?  I had a similar situation until I found out
that the build was the problem.  I just copied proc off the 7.3.2.3
patch cdrom and it started working.  :)

--

Productivity Group POB 60458 Sunnyvale, CA  94088

 
 
 

execute ProC leads to core dump

Post by Jerry Baki » Fri, 21 Nov 1997 04:00:00


Could ProC be a bigger turd?

I had this problem about two weeks ago.  I traced it to a problem in my C
code (using the typical programmer's tool: commenting out code through
divide and conquer and binary search strategies.)

I forget the exact error, but it may have been due to included files ProC
couldn't find, or missing quotes or semicolons.

Best of luck,

Jerry

 
 
 

1. core dump when executing Precompiler samples

Hi!

When I execute 'sample1' I get a core dump.
Here are the last few lines of the 'truss' output:

open("/ocl01/oracle8i/ocommon/nls/admin/data/lx20001.nlb", O_RDONLY) = 3
read(3, " Z Z\0\00210\0\0\002\0\0".., 5696)     = 5693
close(3)                                        = 0
open("/ocl01/oracle8i/ocommon/nls/admin/data/lx10001.nlb", O_RDONLY) = 3
read(3, " Z Z\0\00210\0\0\001\0\0".., 748)      = 748
close(3)                                        = 0
brk(0x0002F690)                                 = 0
brk(0x00031690)                                 = 0
getcontext(0xFFBEEE50)
    Incurred fault #6, FLTBOUNDS  %pc = 0xFEDB092C
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
    Received signal #11, SIGSEGV [caught]
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
sysconfig(_CONFIG_SIGRT_MIN)                    = 38
sigprocmask(SIG_SETMASK, 0xFEBBBEF0, 0x00000000) = 0
sigaction(SIGSEGV, 0xFFBEEB90, 0x00000000)      = 0
sysconfig(_CONFIG_SIGRT_MIN)                    = 38
setcontext(0xFFBEE9F0)
    Incurred fault #6, FLTBOUNDS  %pc = 0xFEDB092C
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
    Received signal #11, SIGSEGV [default]
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
        *** process killed ***

I'm using Oracle 8.1.5 and SUN Solaris.

Please, help me!
I don't know what to do any more. :-(

regards
Remigiusz Rzeszowski

2. UnsupportedEncodingException: hp-roman8

3. PREPARE/EXECUTE core dumps in 4GL

4. Access 2000 - ADP and SQL Server 2000-Beta 2 : You do not have exclusive access to the database at this time. Your design changes will not be saved at this time

5. Executing a stored proc in a stored proc...

6. NeXT User Group Of Ottawa Meeting on January 7th

7. newbie trying to execute a stored proc from within a stored proc

8. SQL Server 7 - problem with char 1 data type

9. Persisting recordset from stored proc to XML re-executes stored proc

10. core dump on a prepare statement

11. Core dump on HP

12. pfree() core dump in 7.2.3