HP2100 Printer Config

HP2100 Printer Config

Post by RWC » Fri, 02 Feb 2001 05:28:46



I have connected a HP2100 to a infowindowII. I would like to use it has the
2nd printer. When I set it up I get part of the page not printing (right
side prints off page). I have looked and looked but can't find any help.
Below is a listed of the way I have it set up now.
Could someone point me in the right direction.
Thanks in advance for your help

                    Change Device Desc (Printer) (CHGDEVPRT)

 Type choices, press Enter.

 Device description . . . . . . . > PRT02         Name
 Port number  . . . . . . . . . .   0             0-65535, *SAME
 Switch setting . . . . . . . . .   1             0-6, *SAME
 Online at IPL  . . . . . . . . .   *YES          *SAME, *YES, *NO
 Font:
   Identifier . . . . . . . . . .   760                   *SAME, 3, 5, 11,
12, 13,18...
   Point size . . . . . . . . . .   *NONE             000.1-999.9, *SAME,
*NONE
 Separator drawer . . . . . . . .   *FILE           1-255, *SAME, *FILE
 Separator program  . . . . . . .   *NONE       Name, *SAME, *NONE
   Library  . . . . . . . . . . .                 Name,     *LIBL, *CURLIB
 Printer error message  . . . . .   *INQ              *SAME, *INQ, *INFO
 Message queue  . . . . . . . . .   QSYSOPR       Name, *SAME
   Library  . . . . . . . . . . .     QSYS                    Name, *LIBL,
*CURLIB
 Host print transform . . . . . .   *YES                  *SAME, *NO, *YES
 Manufacturer type and model  . .   *WSCST
 Paper source 1 . . . . . . . . .   *LETTER              *SAME, *MFRTYPMDL,
*LETTER...
 Paper source 2 . . . . . . . . .   *LETTER           *SAME, *MFRTYPMDL,
*LETTER...
 Envelope source  . . . . . . . .   *NUMBER10     *SAME, *MFRTYPMDL...
 ASCII code page 899 support  . .   *NO           *SAME, *NO, *YES
 Image configuration  . . . . . .   *IMGD01       *SAME, *NONE, *IMGA01...
 Character identifier:
   Graphic character set  . . . .   101                   1-32767, *SAME,
*SYSVAL
   Code page  . . . . . . . . . .   37                        1-32767
 User-defined options . . . . . .   *SAME             Name, *SAME, *NONE
  + for more values
 User-defined object:
   Object . . . . . . . . . . . .   *NONE         Name, *SAME, *NONE
     Library  . . . . . . . . . .                 Name, *LIBL, *CURLIB
   Object type  . . . . . . . . .                 *DTAARA, *DTAQ, *FILE...
 Data transform program . . . . .   *NONE         Name, *SAME, *NONE
   Library  . . . . . . . . . . .                 Name, *LIBL, *CURLIB
 User-defined driver program  . .   *NONE         Name, *SAME, *NONE
   Library  . . . . . . . . . . .                 Name, *LIBL, *CURLIB
 Text 'description' . . . . . . .   'HP 2100'

                            Additional Parameters

 Workstation customizing object     PSCRIPT       Name, *SAME, *NONE
   Library  . . . . . . . . . . .     LASERS      Name, *LIBL, *CURLIB

 
 
 

HP2100 Printer Config

Post by Pat Barbe » Fri, 02 Feb 2001 06:34:00


Go here for ASCII printers help:

http://www.as400service.ibm.com/s_dir/slkbase.NSF/acf2ee1e9d64b16e862...

DO NOT Manual config the printer... Make the setting on the
terminal and let the system autoconfig the printer....


> I have connected a HP2100 to a infowindowII. I would like to use it has the
> 2nd printer. When I set it up I get part of the page not printing (right
> side prints off page). I have looked and looked but can't find any help.
> Below is a listed of the way I have it set up now.
> Could someone point me in the right direction.
> Thanks in advance for your help

>                     Change Device Desc (Printer) (CHGDEVPRT)

>  Type choices, press Enter.

>  Device description . . . . . . . > PRT02         Name
>  Port number  . . . . . . . . . .   0             0-65535, *SAME
>  Switch setting . . . . . . . . .   1             0-6, *SAME
>  Online at IPL  . . . . . . . . .   *YES          *SAME, *YES, *NO
>  Font:
>    Identifier . . . . . . . . . .   760                   *SAME, 3, 5, 11,
> 12, 13,18...
>    Point size . . . . . . . . . .   *NONE             000.1-999.9, *SAME,
> *NONE
>  Separator drawer . . . . . . . .   *FILE           1-255, *SAME, *FILE
>  Separator program  . . . . . . .   *NONE       Name, *SAME, *NONE
>    Library  . . . . . . . . . . .                 Name,     *LIBL, *CURLIB
>  Printer error message  . . . . .   *INQ              *SAME, *INQ, *INFO
>  Message queue  . . . . . . . . .   QSYSOPR       Name, *SAME
>    Library  . . . . . . . . . . .     QSYS                    Name, *LIBL,
> *CURLIB
>  Host print transform . . . . . .   *YES                  *SAME, *NO, *YES
>  Manufacturer type and model  . .   *WSCST
>  Paper source 1 . . . . . . . . .   *LETTER              *SAME, *MFRTYPMDL,
> *LETTER...
>  Paper source 2 . . . . . . . . .   *LETTER           *SAME, *MFRTYPMDL,
> *LETTER...
>  Envelope source  . . . . . . . .   *NUMBER10     *SAME, *MFRTYPMDL...
>  ASCII code page 899 support  . .   *NO           *SAME, *NO, *YES
>  Image configuration  . . . . . .   *IMGD01       *SAME, *NONE, *IMGA01...
>  Character identifier:
>    Graphic character set  . . . .   101                   1-32767, *SAME,
> *SYSVAL
>    Code page  . . . . . . . . . .   37                        1-32767
>  User-defined options . . . . . .   *SAME             Name, *SAME, *NONE
>   + for more values
>  User-defined object:
>    Object . . . . . . . . . . . .   *NONE         Name, *SAME, *NONE
>      Library  . . . . . . . . . .                 Name, *LIBL, *CURLIB
>    Object type  . . . . . . . . .                 *DTAARA, *DTAQ, *FILE...
>  Data transform program . . . . .   *NONE         Name, *SAME, *NONE
>    Library  . . . . . . . . . . .                 Name, *LIBL, *CURLIB
>  User-defined driver program  . .   *NONE         Name, *SAME, *NONE
>    Library  . . . . . . . . . . .                 Name, *LIBL, *CURLIB
>  Text 'description' . . . . . . .   'HP 2100'

>                             Additional Parameters

>  Workstation customizing object     PSCRIPT       Name, *SAME, *NONE
>    Library  . . . . . . . . . . .     LASERS      Name, *LIBL, *CURLIB


 
 
 

HP2100 Printer Config

Post by Sandr » Sat, 03 Feb 2001 03:24:43


CHGDEVPRT ....
TRANSFORM      *YES
MFRTYPMDL      *HPIII
 
 
 

1. CA95-How to Config Local Printer to System Printer

I have recently connected to our AS400 via CA95 and TCP/IP.  Works
great and much cleaner than RUMBA and WFWG 3.11. I want to convert all
to CA95 and TCP/IP (Intranet) but don't know how to configure a local
printer to an AS400 printer. With RUMBA it is very straight forward.

We are just getting our AS400 system up so I am new to this group.
HELP would be appreciated. Thanks

Lou Cuhrt
Marina del Rey, CA

2. 540 ripoff

3. help with restoring *CONFIG* http config file...

4. gcc g++: File.h for gcc - did you ever seen

5. HP JetDirect Printer Device Config

6. Need an Firewall Engineer at Cincinnati OH for 6+Months

7. how to config Client Access DBCS printer session

8. Current Figure and removing old figures

9. Need help installing HP2100

10. HP4050N Printer Config

11. CA95 Printer Config w/ NW4.11

12. Printer Config with CA under TCP/IP: How?

13. Printer 4230 config problems