frame-relay interface-dlci vs frame-relay local-dlci

frame-relay interface-dlci vs frame-relay local-dlci

Post by francois em » Sat, 23 Dec 2000 19:24:50



what is the MAIN difference between
-frame-relay interface-dlci
and
-frame-relay local-dlci

thanks for your comments
frans

 
 
 

1. frame-relay interface-dlci command

Hi there:

with older IOS version when you configure a frame relay sub-interfaces you
may indicate that on a define PVC you will like to send the broadcast:

!
interface Serial4/2.21 point-to-point
 ip address 10.2.21.1 255.255.255.0
 ipx network 21
 frame-relay interface-dlci 21 broadcast
!

now you only can have:

!
interface Serial4/2.21 point-to-point
 ip address 10.2.21.1 255.255.255.0
 ipx network 21
 frame-relay interface-dlci 21
!

I am not having problems routing IP, but with IPX (in a star topology) I
can not see from one remote location the IPX networks from another one.

Any comments?

Thanks

-fred

2. Circlin' the drain!

3. Frame-Relay interface-dlci command with 'protocol ip'

4. **Info on 14.4 kbaud modems**

5. frame-relay interface-dlci 43

6. Nowhere Directories...

7. frame-relay->dlci->local "local-dlci" doesn't match remote "frame relay map ip"

8. Using the FCBS command with Win98

9. frame-relay interface dlci ietf

10. Frame-Relay config same DLCI

11. cisco2500: remove a dlci from de frame-relay map

12. frame-relay traffic shaping for selected DLCI

13. Frame relay DLCI, COMSAT RSI VSAT frame realy