CiscoPro 1004 + chat scripts

CiscoPro 1004 + chat scripts

Post by Jon Dust » Sat, 17 Aug 1996 04:00:00



I have been having *drastic* problems with a CiscoPro 1004 ISDN BRI port It
appears to not be using the chat-script I assign to the BRI. When I choose
'debug chat' 'debug dialer' and 'debug isdn event', I am not seeing any
references to using a chat script.

My situation is as follows: BRI --> Livingston Portmaster (expecting a
login sequence, *not* CHAP or PAP)

All debug results show the ISDN link connect, but then drop because no
packets may be passed (I have not been able to 'login' to the Livingston).

My box is running 11.0(6) (CiscoPro version)

Any and all help/assistance would be appreciated

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Network Specialist
University Computing Technologies
University of Southern Maine        207-780-4152

 
 
 

CiscoPro 1004 + chat scripts

Post by Dennis Pen » Sat, 17 Aug 1996 04:00:00


The chat-script cannot be used on a sync BRI port. It is only used
for async modem scripting. Is the Portmaster really set up to do
ISDN? The only way to get a login sequence on an ISDN side would
be if it supported incoming v.120 calls. The 1004 doesn't support
making outbound v.120 calls.

Dennis

> I have been having *drastic* problems with a CiscoPro 1004 ISDN BRI port It
> appears to not be using the chat-script I assign to the BRI. When I choose
> 'debug chat' 'debug dialer' and 'debug isdn event', I am not seeing any
> references to using a chat script.

> My situation is as follows: BRI --> Livingston Portmaster (expecting a
> login sequence, *not* CHAP or PAP)

> All debug results show the ISDN link connect, but then drop because no
> packets may be passed (I have not been able to 'login' to the Livingston).

> My box is running 11.0(6) (CiscoPro version)

> Any and all help/assistance would be appreciated

> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

> Network Specialist
> University Computing Technologies
> University of Southern Maine        207-780-4152

-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Customer Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 526-8787

-------------------------------------------------------------------------

 
 
 

1. Cisco 1004 vs. CiscoPro 1004

I would appreciate if anybody answers my question:

Can an IP/IPX feature set (IOS 11.1)for CiscoPro 1004 work on
Cisco 1004 router, or there are hardware or firmware differences
between these two products that could prevent that.

Thank you.

Artak Melkonian

2. Amiga Programmin books in C

3. New CPA1004 prob... (was Re: CiscoPro 1004 + chat scripts)

4. Regarding DLLs

5. Modem chat script and System Chat script

6. xerces-j and Socket Streams

7. 1004 - 1004 connection issues

8. cisco 1004

9. PCMCIA flash problem on Cisco 1004 ISDN router

10. Reserved IP ranges and Cisco 1004 router

11. Cisco 1004 router

12. 1004 router for E1 ?