AUX as PPP Dial-in

AUX as PPP Dial-in

Post by Bruce Pinsk » Fri, 29 Dec 1995 04:00:00



Quote:Robin Greenhagen writes:

==>
==>What are the limitations of using the AUX of a 25xx as a PPP
==>dialin receiver?  What would need to be done to make this
==>port authenticate from our TACACS server like the ASYNC ports
==>do on a 2509 or 2511.  Any help and/or samples would be
==>greatly appreciated.
==>

AUX port has a max speed of 38.4Kbps.  You can configure the AUX port
just like the async interfaces of a 2509/11.  Just reference <int async
1>.

+-------------------------+-----------------------+---------------------------+
+      ||        ||       +                       + Bruce Pinsky              +
+      ||        ||       + Cisco Systems, Inc.   + Sr. Internetwork Supt Engr+
+     ||||      ||||      + 170 West Tasman Drive + Phone: (800) 553-24HR     +
+ ..:||||||:..:||||||:..  + San Jose, CA  95134   + Fax:   (408) 526-8787     +

+-------------------------+-----------------------+---------------------------+
|                 ** The Science of Networking Networks **                    |
+-----------------------------------------------------------------------------+

 
 
 

1. AUX as PPP Dial-in

What are the limitations of using the AUX of a 25xx as a PPP
dialin receiver?  What would need to be done to make this
port authenticate from our TACACS server like the ASYNC ports
do on a 2509 or 2511.  Any help and/or samples would be
greatly appreciated.

Cheers!

Robin Greenhagen
GreenSoft Solutions

2. Quadra 950 rumour

3. aux to aux dial up but spoofing?

4. Help! HP JetDirect with LanServer 4.0

5. Can I connect two routers directly through aux ports (AUX to AUX) ?

6. FS: **Brand New** HP 360LX FS: **Brand New** HP 360LX

7. dial-out on aux port to ppp/slip connection

8. Solidworks 98 Plus demo botched

9. Aux port dial in PPP access

10. Cisco 2501 with dial-in on AUX (async)

11. AUX 0 and modem dial-in

12. AUX port dial-in config

13. Aux port dial-in