by Hal Pitt » Fri, 29 Jun 2001 01:26:07
Thanks in advance for the help.
Hal
by Barry von Tobe » Tue, 03 Jul 2001 20:22:35
> I am looking for an simple example of connecting a Cisco ATA-186 analog
> phone to
> IP (SIP or H.323) converter to a Cisco 2610 with FXO ports connected to the
> PSTN.
> I want the phones to be able to call/receive calls via the PSTN.
> Thanks in advance for the help.
> Hal
Barry
1. Configure Cisco ATA-186 Analog/SIP/h323 via 2600 and FXO voice cards
As I understand it, you want to call from a cisco 2610 to the 186 via
IP.
To do this, you have to create dial-peers (voip not pots) in your 2610
that matches the UIDs of your ATA. Dial-peers must use
"destination-pattern"
and "session target" commands. Make sure also that you are you using
the correct
codec. Otherwise, you'll get one-way or no audio at all.
This applies both to SIP and H323.
--
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG
2. Software Test Plan standard and template
3. Enumeration of USB printer ports
4. Airline schedules database ?
5. (PBX)-pots<->vic-fxo-(cisco2600)-10baseT<->10baseT-(cisco ata-186)-FXS-pots?
6. Ross/Hal Ag-10e framebuffer drivers
7. Can a Cisco ATA-186 be coerced to do FXO?
8. how to connect ATA 186 Phone to ATA 186 Phone
9. How different is the new ATA 186-I1 from the old ATA 186 -L-I1?
10. Problem With Cisco ATA 186 SIP Mode
11. Cisco ATA 186 and Ubiquity SIP UA