ASM

ASM

Post by 7013 David Scot » Fri, 19 Aug 1994 07:32:43



Does anybody know if SLIP and PPP can be run on the same Line with the new
9.21 software?  I remember that this couldn't be done with older software
because the PPP was a kludge.  I hope it can be done with 9.21.

Thanks in advance.

David Scott
Electronics Engineer
206.396.1328

 
 
 

ASM

Post by Eriks Rugeli » Fri, 19 Aug 1994 08:13:44


Quote:>Does anybody know if SLIP and PPP can be run on the same Line with the new
>9.21 software?  I remember that this couldn't be done with older software
>because the PPP was a kludge.  I hope it can be done with 9.21.

In 9.21 there are distinct SLIP and PPP exec commands that start the
respectively named protocol.  We use 9.21(3).  It works just fine for us.
---
Eriks Rugelis         York University,
Network Operations    Computing, Communications and Instructional Services,
                      029 Steacie Science Library, 4700 Keele Street,
                      North York, Ontario, Canada. M3J 1P3

                                            FAX: +1 416 736 5700

         --- Bureaucracy: turning energy into solid waste ---

 
 
 

1. RAD ASM 30 and ASM 20 experience

Is anyuone familiar with the RAD ASM 30 and ASM 20 short haul modems.

They advertise to use regular copper between 2 points up to 13 miles
And they can have speeds up to 144KBS.
We are interested in them to connect routers from the campus backbone
to remote dorms etc.

Any experience with reliability and resistance to noise?
--

Academic Computing and Networking Services
Northwestern University, 2129 Sheridan Road
Evanston, IL  60208            708-491-4056

2. epson stylus color 800

3. OLD CISCO ASM CSC3 - Terminal line configuration

4. New Vaja Case for iPAQ+CF Sleeve!!!

5. ASM & CSC-2E problem ...

6. Wildfire

7. Looking for firmware to support PPP for ASM-CSC/4

8. CAD on Series 5

9. Needed: Firmware for ASM-CSC/4 (need PPP)

10. cisco2509 and RAD ASM 31 problems!

11. slow uploads with asm/cs

12. ASM/CS 40 degrading performance

13. how to clear "uses' on ASM??