by Brian Leun » Thu, 13 Jul 2000 04:00:00
by Blach Dariu » Thu, 13 Jul 2000 04:00:00
Hi Brian,
since this is a 3102, you cannot set the clock-rate on the serial interface (
you must have a V.35 DTE cable on this side).
You will need a V.35 DCE cable for the 2501 (CABV.35FC).
- Darius
|
darius.vcf < 1K Download |
by Brian Leun » Thu, 13 Jul 2000 04:00:00
> since this is a 3102, you cannot set the clock-rate on the serial
interface (
> you must have a V.35 DTE cable on this side).
> You will need a V.35 DCE cable for the 2501 (CABV.35FC).
> - Darius
> > hello,
> > I want to connect a old Cisco 3102 to a 2501 through the serial
interface.
> > But I don't know what kind of cable I need to buy? by default, I already
> > have a V.35 cable of my 3102.
> > thanks
by Blach Dariu » Thu, 13 Jul 2000 04:00:00
Take a look at the cable, you will find a string like this : CAB-NPV35T; The T
at the end will indicate that it is a DTE Cable.
But for a simple identification the DCE cable will be female and the DTE cable
will be male.
For your direct posting:
the only old 3000 series router that can clock a serial interface is the 3104
witch has 2 serial and 1 ethernet interface.
I think the difference is that the other models dont have a chip for the clock,
the motherbord is the same for all models.
Check out the documentation CD Rom or CCO for detaild information.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis300...
- Darius
> > Hi Brian,
> > since this is a 3102, you cannot set the clock-rate on the serial
> interface (
> > you must have a V.35 DTE cable on this side).
> > You will need a V.35 DCE cable for the 2501 (CABV.35FC).
> > - Darius
> > > hello,
> > > I want to connect a old Cisco 3102 to a 2501 through the serial
> interface.
> > > But I don't know what kind of cable I need to buy? by default, I already
> > > have a V.35 cable of my 3102.
> > > thanks
|
darius.vcf < 1K Download |
1. ip link from 2500/3000 to as/400 over leased line
Hello,
I'd like to know if anybody has used something similar to the following
setup :
+----+ +----+ +-----+ +-----+ +-------+ +----+
| B1 +-Eth-+ As +=V35=+ LLA +<=LL=>+ LLA +=V35=+ Cisco +-Eth-+ B2 |
+----+ +----+ +-----+ +-----+ +-------+ +----+
Key:
B1, B2 : Boxes running any TCP aware OS
Eth : Ethernet link
As : AS/400, running v4r3m0 or higher
V35 : V35 link
LLA : leased line adapter
LL : leased line
Cisco : Cisco router, 2500 or 3000 (dusty spares from a friend :)
The goal is permitting B1 & B2 to communicate via tcp/ip, B1 using the
as/400 as its default gateway.
The as/400 seems to be only able to use the ll via frame relay (From the
ibm doc).
Which release of ios should i run to be able to talk to the as/400 and
what type of encapsulation should i use on the serial interface ?
All comments welcome.
TIA
Eric Masson
--
> (Pas Adabase que j'ai en version dmo sur la distribution Suze).
Et aprs ?a, allez expliquer que les linuxiens sont pas alcolos... ;-)
quand une distribution Kro v1.6.64 ou Pastis v5.1?
-+- Fantec In Guide du linuxien pervers - "C'est l'heure de l'apro ?" -+-
4. Identifying the netwok client
5. Help: Vines 4.11.5 Problem with Cisco 3000 & 2500
6. !!!! Mac NuBus Music Cards 4 sale !!!!
9. 3000/2500 Series & Memory Hassles & 9.21
11. Linux on a 2500, 3000 or 4000