1. How? Upgrade SRAM OF cisco4000.
Hi! everyone
Please, give to advice for me.
Our cisco4000 has too many interface reset.....
I think it cause small SRAM of cisco 4000.
so I am going to upgrade SRAM.
Is it proper solution in followed situation?
Thank you,
------------------------------------------------------------------
r3#sh ver
4000 Software (XX-K), Version 9.14(6)[fc2], RELEASE SOFTWARE
Patchlevel = 9.1(10)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Thu 07-Apr-94 14:19 by chansen
System Bootstrap, Version (5), SOFTWARE
r3 uptime is 4 days, 20 hours, 57 minutes
System restarted by power-on
System image file is "xk91460z", booted via flash
cisco 4000 (68030) processor (revision 0xA0) with 16384K/4096K bytes of
memory.
Processor ID 5057018
DDN X.25 software, Version 2.0, NET2 and BFE compliant.
Bridging software.
4 Ethernet/IEEE 802.3 interfaces.
1 FDDI network interface.
128K bytes of non-volatile configuration memory.
2048K bytes of Flash address space sized on CPU board.
Configuration register is 0x2102
r3#sh mem
Head FreeList Total(b) Used(b) Free(b)
Largest(b)
Processor 0024E7A8 002B56F0 14358616 419632 13938984
13925024
IO memory 06000000 06080944 4194304 3091768 1102536
1084296
SRAM 00001000 00010DFC 65536 65060 476
476
--More--
r3#sh buff
Buffer elements:
500 in free list (500 max allowed)
5548772 hits, 0 misses, 0 created
Small buffers, 104 bytes (total 400, permanent 400):
400 in free list (160 min, 1200 max allowed)
2101728 hits, 0 misses, 0 trims, 0 created
Middle buffers, 600 bytes (total 200, permanent 200):
199 in free list (80 min, 600 max allowed)
306663 hits, 0 misses, 0 trims, 0 created
Big buffers, 1524 bytes (total 199, permanent 160):
39 in free list (40 min, 200 max allowed)
479615 hits, 0 misses, 2485 trims, 2524 created
Large buffers, 5024 bytes (total 32, permanent 24):
32 in free list (16 min, 32 max allowed)
6825962 hits, 247470 misses, 185 trims, 193 created
Huge buffers, 18024 bytes (total 1, permanent 1):
1 in free list (0 min, 32 max allowed)
0 hits, 0 misses, 0 trims, 0 created
247470 failures (0 no memory)
2. DSP Ram Slot ?
3. CISCO4000 Mem Upgrade
4. Two nets on 1601?
5. 1601 Flash upgrade invalid Magic number, flash bank chip unkwnon
6. Seikosha Printers for Atari
7. Failed to upgrade PIX-520 from 2MB flash to 16 MB flash.
8. Newbie qns - landscape mode, footers, background
9. C2501 with 4MB Flash and upgrade 4MB Flash from Kingston.
10. upgrade 8mb flash to 16mb flash
11. Using "NON-Cisco" SDRAM and FLASH in upgrades ?
12. upgrading 1900 switch flash
13. Upgrade flash (4 mb memry card) to 827-4v