by m.. » Thu, 17 Oct 1996 04:00:00
Hi,
I am trying to replace the NetWare Connect 2 server with the cisco
2509 8-port Asyn.access server. The 2509 support ppp encapsulation of
IPX traffic which enables the NetWare Connect 2 clients to dial into
the 2509. However, I am not sure if the NetWare Connect 2 clients can
connect to the NetWare network behind the 2509 or not?
In addition, does the 2509 Asyn. lines' PPP support IPX and IP
simultaneously?
Thanks
Mike
by Bruce Pinsk » Fri, 18 Oct 1996 04:00:00
==>Quote:Mike writes:
Yes. It wouldn't be of much use if it didn't.
==>In addition, does the 2509 Asyn. lines' PPP support IPX and IP
==>simultaneously?
==>
Certainly.
+-------------------------+-----------------------+------------------------
+ || || + + Bruce Pinsky +
+ || || + Cisco Systems, Inc. + Sr. Internetwork Supt Engr+
+ |||| |||| + 170 West Tasman Drive + Phone: (800) 553-24HR +
+ ..:||||||:..:||||||:.. + San Jose, CA 95134 + Fax: (408) 232-2374 +
+-------------------------+-----------------------+------------------------
| ** The Science of Networking Networks ** |
+--------------------------------------------------------------------------
1. netware connect - remote node vs. remote control?
I'm new to the world of Netware Connect so I someone could answer a
complex question simply I would appreciate it. Connect was configured
in my office to use Stac's Reachout for Remote Control connections. In
working with dialup users I have seen the draw backs of this type of
service - the main one being accessing the local client hard drive when
connected, file transfer has to be used. Has anybody worked with both
types of connections and what are your opinions of both - pros/cons?
3. NetWare Connect 2.0 problem with remote node
4. Schema changes affect regular select?
5. Netware Connect 2 Dial-In (Remote Node) - Why No Login F Drive ?
6. Eudora 4.0: Outbox but no Inbox
7. ? remote control via remote node
9. remote link thru dialup to cisco 2509
10. Remote Printing with Cisco Access Server (2509 or 5200)
11. How to acces a remote modem that is connected to a Cisco 2509 Async port
13. Remote console via Terminal Server 2509 or 2511