Source-bridging problem over frame-relay

Source-bridging problem over frame-relay

Post by Hansen, Ki » Fri, 25 Aug 1995 04:00:00



We are having a problem with source-bridged traffic over a
T1 frame-relay link.  We have a Cisco 7000 router running
point-to-point subinterfaces going to a Cisco 2502 router.
All IP traffic flows just fine, but we are unable to get
a source-bridged traffic to flow over the links.

Here is the configuration for the 7000:

! Remote Peers to Loopbacks on other routers
!
!
source-bridge ring-group 4095
source-bridge remote-peer 4095 tcp 164.154.64.129
source-bridge remote-peer 4095 tcp 164.154.240.1 (Loopback on 7000)
source-bridge remote-peer 4095 tcp 164.154.16.129
source-bridge remote-peer 4095 tcp 164.154.8.129
source-bridge remote-peer 4095 tcp 164.154.80.129
source-bridge remote-peer 4095 tcp 164.154.48.129
source-bridge remote-peer 4095 tcp 164.154.112.129
!
interface Serial2/6
description Circui ID 51-UHDA-94861 to Frame Relay (Sioux Falls)
no ip address
encapsulation frame-relay
!
interface Serial2/6.17 point-to-point
description DLCI 17 Frame Relay connection to Sioux Falls REV
ip address 164.154.200.129 255.255.255.128
frame-relay interface-dlci 17 broadcast
!

Here is the configuration for the 2502:
!
! Remote Peers to Loopbacks on other routers
! Connected on the Cisco 7000 via leased lines
!
source-bridge ring-group 4095
source-bridge remote-peer 4095 tcp 164.154.64.129 (Loopback on 2502)
source-bridge remote-peer 4095 tcp 164.154.240.1
source-bridge remote-peer 4095 tcp 164.154.16.129
source-bridge remote-peer 4095 tcp 164.154.8.129
source-bridge remote-peer 4095 tcp 164.154.80.129
source-bridge remote-peer 4095 tcp 164.154.48.129
source-bridge remote-peer 4095 tcp 164.154.112.129
!
interface Serial0
description Circuit ID 51-UHDA-94764 T1 Frame Relay to Pierre
ip address 164.154.200.130 255.255.255.128
encapsulation frame-relay
ip split-horizon
frame-relay map ip 164.154.200.129 16 broadcast

Is this configured correctly for source-bridge traffic?
If so, are there any framing issues over T1 that should
be taken into consideration?  BTW, the connection between
the 7000 and 2502 works fine over a leased 56K line.

We've been working on this one for over a month, and
would GREATLY appreciate any help in this problem
Thanks in advance!

Kim

===========================================================
Kim Hansen
Information Services - State of South Dakota

(605)773-6340
(605)773-3741 FAX
===========================================================
        "Work is for people who don't know how to fish!"

 
 
 

Source-bridging problem over frame-relay

Post by Alan Ciche » Sat, 26 Aug 1995 04:00:00


Kim,
Not sure if I miss a point here, but I dont see any mention of the token ring
side of things.

I assume that one of the remote peer statements is pointing to your token ring.

And that the token ring int has something like this.

interface TokenRing 0
ip address XXXXXXXXXXXX
ring-speed 16
source-bridge 1049 1 4095
source-bridge spanning
source-bridge proxy-explorer
netbios enable-name-cache

Or are you saying it works fine over the leased line, but not over frame relay?

Alan

 
 
 

Source-bridging problem over frame-relay

Post by Ruiyuan_Jiang/Advantage_KBS_at_LotusX.. » Sat, 26 Aug 1995 04:00:00


We are having a problem with source-bridged traffic over a
T1 frame-relay link.  We have a Cisco 7000 router running
point-to-point subinterfaces going to a Cisco 2502 router.
All IP traffic flows just fine, but we are unable to get
a source-bridged traffic to flow over the links.

Here is the configuration for the 7000:

! Remote Peers to Loopbacks on other routers
!
!
source-bridge ring-group 4095
source-bridge remote-peer 4095 tcp 164.154.64.129
source-bridge remote-peer 4095 tcp 164.154.240.1 (Loopback on 7000)
source-bridge remote-peer 4095 tcp 164.154.16.129
source-bridge remote-peer 4095 tcp 164.154.8.129
source-bridge remote-peer 4095 tcp 164.154.80.129
source-bridge remote-peer 4095 tcp 164.154.48.129
source-bridge remote-peer 4095 tcp 164.154.112.129
!
interface Serial2/6
description Circui ID 51-UHDA-94861 to Frame Relay (Sioux Falls)
no ip address
encapsulation frame-relay
!
interface Serial2/6.17 point-to-point
description DLCI 17 Frame Relay connection to Sioux Falls REV
ip address 164.154.200.129 255.255.255.128
frame-relay interface-dlci 17 broadcast
!

Here is the configuration for the 2502:
!
! Remote Peers to Loopbacks on other routers
! Connected on the Cisco 7000 via leased lines
!
source-bridge ring-group 4095
source-bridge remote-peer 4095 tcp 164.154.64.129 (Loopback on 2502)
source-bridge remote-peer 4095 tcp 164.154.240.1
source-bridge remote-peer 4095 tcp 164.154.16.129
source-bridge remote-peer 4095 tcp 164.154.8.129
source-bridge remote-peer 4095 tcp 164.154.80.129
source-bridge remote-peer 4095 tcp 164.154.48.129
source-bridge remote-peer 4095 tcp 164.154.112.129
!
interface Serial0
description Circuit ID 51-UHDA-94764 T1 Frame Relay to Pierre
ip address 164.154.200.130 255.255.255.128
encapsulation frame-relay
ip split-horizon
frame-relay map ip 164.154.200.129 16 broadcast

Is this configured correctly for source-bridge traffic?
If so, are there any framing issues over T1 that should
be taken into consideration?  BTW, the connection between
the 7000 and 2502 works fine over a leased 56K line.

We've been working on this one for over a month, and
would GREATLY appreciate any help in this problem
Thanks in advance!

Kim

 
 
 

Source-bridging problem over frame-relay

Post by Dennis Win » Sun, 27 Aug 1995 04:00:00


There is not enough information to diagnos the problem.
Suggest opening a case with tac:
Questions:
1) What is the config for the token ring interfaces?
2) What does a sh sou show?
3) Does any traffic get across? Does traffic start, then die later on?
Dennis


Quote:> We are having a problem with source-bridged traffic over a
> T1 frame-relay link.  We have a Cisco 7000 router running
> point-to-point subinterfaces going to a Cisco 2502 router.
> All IP traffic flows just fine, but we are unable to get
> a source-bridged traffic to flow over the links.

> Here is the configuration for the 7000:

> ! Remote Peers to Loopbacks on other routers
> !
> !
> source-bridge ring-group 4095
> source-bridge remote-peer 4095 tcp 164.154.64.129
> source-bridge remote-peer 4095 tcp 164.154.240.1 (Loopback on 7000)
> source-bridge remote-peer 4095 tcp 164.154.16.129
> source-bridge remote-peer 4095 tcp 164.154.8.129
> source-bridge remote-peer 4095 tcp 164.154.80.129
> source-bridge remote-peer 4095 tcp 164.154.48.129
> source-bridge remote-peer 4095 tcp 164.154.112.129
> !
> interface Serial2/6
> description Circui ID 51-UHDA-94861 to Frame Relay (Sioux Falls)
> no ip address
> encapsulation frame-relay
> !
> interface Serial2/6.17 point-to-point
> description DLCI 17 Frame Relay connection to Sioux Falls REV
> ip address 164.154.200.129 255.255.255.128
> frame-relay interface-dlci 17 broadcast
> !

> Here is the configuration for the 2502:
> !
> ! Remote Peers to Loopbacks on other routers
> ! Connected on the Cisco 7000 via leased lines
> !
> source-bridge ring-group 4095
> source-bridge remote-peer 4095 tcp 164.154.64.129 (Loopback on 2502)
> source-bridge remote-peer 4095 tcp 164.154.240.1
> source-bridge remote-peer 4095 tcp 164.154.16.129
> source-bridge remote-peer 4095 tcp 164.154.8.129
> source-bridge remote-peer 4095 tcp 164.154.80.129
> source-bridge remote-peer 4095 tcp 164.154.48.129
> source-bridge remote-peer 4095 tcp 164.154.112.129
> !
> interface Serial0
> description Circuit ID 51-UHDA-94764 T1 Frame Relay to Pierre
> ip address 164.154.200.130 255.255.255.128
> encapsulation frame-relay
> ip split-horizon
> frame-relay map ip 164.154.200.129 16 broadcast

> Is this configured correctly for source-bridge traffic?
> If so, are there any framing issues over T1 that should
> be taken into consideration?  BTW, the connection between
> the 7000 and 2502 works fine over a leased 56K line.

> We've been working on this one for over a month, and
> would GREATLY appreciate any help in this problem
> Thanks in advance!

> Kim

 
 
 

1. Source-bridged traffic over Frame Relay Problem

We are having a problem with source-bridged traffic over a
T1 frame-relay link.  We have a Cisco 7000 router running
point-to-point subinterfaces going to a Cisco 2502 router.
All IP traffic flows just fine, but we are unable to get
a source-bridged traffic to flow over the links.

Here is the configuration for the 7000:

! Remote Peers to Loopbacks on other routers
!
!
source-bridge ring-group 4095
source-bridge remote-peer 4095 tcp 164.154.64.129
source-bridge remote-peer 4095 tcp 164.154.240.1 (Loopback on 7000)
source-bridge remote-peer 4095 tcp 164.154.16.129
source-bridge remote-peer 4095 tcp 164.154.8.129
source-bridge remote-peer 4095 tcp 164.154.80.129
source-bridge remote-peer 4095 tcp 164.154.48.129
source-bridge remote-peer 4095 tcp 164.154.112.129
!
interface Serial2/6
description Circui ID 51-UHDA-94861 to Frame Relay (Sioux Falls)
no ip address
encapsulation frame-relay
!
interface Serial2/6.17 point-to-point
description DLCI 17 Frame Relay connection to Sioux Falls REV
ip address 164.154.200.129 255.255.255.128
frame-relay interface-dlci 17 broadcast
!

Here is the configuration for the 2502:
!
! Remote Peers to Loopbacks on other routers
! Connected on the Cisco 7000 via leased lines
!
source-bridge ring-group 4095
source-bridge remote-peer 4095 tcp 164.154.64.129 (Loopback on 2502)
source-bridge remote-peer 4095 tcp 164.154.240.1
source-bridge remote-peer 4095 tcp 164.154.16.129
source-bridge remote-peer 4095 tcp 164.154.8.129
source-bridge remote-peer 4095 tcp 164.154.80.129
source-bridge remote-peer 4095 tcp 164.154.48.129
source-bridge remote-peer 4095 tcp 164.154.112.129
!
interface Serial0
description Circuit ID 51-UHDA-94764 T1 Frame Relay to Pierre
ip address 164.154.200.130 255.255.255.128
encapsulation frame-relay
ip split-horizon
frame-relay map ip 164.154.200.129 16 broadcast

Is this configured correctly for source-bridge traffic?
If so, are there any framing issues over T1 that should
be taken into consideration?  BTW, the connection between
the 7000 and 2502 works fine over a leased 56K line.

We've been working on this one for over a month, and
would GREATLY appreciate any help in this problem
Thanks in advance!

Kim

===========================================================
Kim Hansen
Information Services - State of South Dakota

(605)773-6340
(605)773-3741 FAX
===========================================================
        "Work is for people who don't know how to fish!"

2. READ THE WEB-SITE THAT THE KIKES TRY TO CENSOR

3. Source-Bridge over Frame Relay Problem (SOLVED!!!)

4. Looking for a Monitor application

5. frame-relay interface-dlci vs frame-relay local-dlci

6. SW56 and ISDN

7. Bridge over frame-relay question

8. Sendmail Weirdness with Host Lookup

9. Bridging Frame-relay on 2 PVCs

10. Bridging and frame-relay

11. Bridging with Cisco 2611 over Frame-Relay

12. source static NAT and frame-relay

13. Transparent bridging over Frame Relay - Problem