by tenxo » Thu, 30 May 2002 11:46:20
I have a Cisco ATA 186 configured in SIP and a Ubiquity SIP UA. I can call
Ubiquity to ATA186 but not the other way around. Has anyone successfully
used Ubiquity to call ATA186? Can any one suggest other SIP UA software that
has been tested to work with ATA186.
Thanks
1. how to connect ATA 186 Phone to ATA 186 Phone
Hi all
i have in network configured with Services Provider 2 ATA 186 installed
in my network with 2 phone
iam able to call any where in the world phone
i want to dial ATA 186 phone to ATA 186 phone
how can dial
1 ip address of ATA is 202.x.x.30
2 ip addrress of ATA is 202.63.x.31
how can dial 30 to 31
iam not able to do
could some one help me thanks
ain advacne
3. How different is the new ATA 186-I1 from the old ATA 186 -L-I1?
5. Configure Cisco ATA-186 Analog/SIP/h323 via 2600 and FXO voice cards
6. Network Printers go offline at night - Event ID 2004
8. Problem With Cisco ATA 186 SIP Mode
9. Configure Cisco ATA-186 Analog/SIP/h323 via 2600 and FXO voice cards
10. Problem With Cisco ATA 186 SIP Mode
11. Configure Cisco ATA-186 Analog/SIP/h323 via 2600 and FXO voice cards
12. ATA 186 & AS5300 peer-to-peer - SIP