HELP Cisco ATA 186 Second line

HELP Cisco ATA 186 Second line

Post by Joseph Inya » Sun, 21 Jul 2002 03:21:30



Hi all:

X     ATA 186 line 1                                      
      ATA 186 line 2 \                                  
                       D-Link Router -----IP----  Z ATA 186 line 1
Y     ATA 186 line 1 /                              ATA 186 line 2
      ATA 186 line 2

Using SIP behind D-link router
Box X has ports 10000 and 5060 forwarded
Box Y has ports 10001 and 5061 forwarded
Box X has UIDO = 1111, UID1 = 1122
Box y has UIDO = 2211, UID1 = 2222
Box Z has UIDO = 1111, UID1 = 1122
I am able to call from line 1 of boxes X,Y and Z to other line 1 (X, Y,Z)
Cannot call any line 2
When calling from line two the call reciever can hear me but I cannot hear them

Thanks in advance!!!

Joseph

 
 
 

HELP Cisco ATA 186 Second line

Post by Simon Grono » Mon, 22 Jul 2002 06:57:47


are you dialing the following way

I found this wored for me


Quote:> Hi all:

> X     ATA 186 line 1
>       ATA 186 line 2 \
>                        D-Link Router -----IP----  Z ATA 186 line 1
> Y     ATA 186 line 1 /                              ATA 186 line 2
>       ATA 186 line 2

> Using SIP behind D-link router
> Box X has ports 10000 and 5060 forwarded
> Box Y has ports 10001 and 5061 forwarded
> Box X has UIDO = 1111, UID1 = 1122
> Box y has UIDO = 2211, UID1 = 2222
> Box Z has UIDO = 1111, UID1 = 1122
> I am able to call from line 1 of boxes X,Y and Z to other line 1 (X, Y,Z)
> Cannot call any line 2
> When calling from line two the call reciever can hear me but I cannot hear
them

> Thanks in advance!!!

> Joseph


 
 
 

HELP Cisco ATA 186 Second line

Post by Joseph Inya » Tue, 23 Jul 2002 06:44:50


Simon:
Thanks for the reply....

when I dial 192.xxx.xxx.xxx ..I get the first phone line or port.
I tired using * and # and none of them has worked.


> are you dialing the following way


> I found this wored for me



> > Hi all:

> > X     ATA 186 line 1
> >       ATA 186 line 2 \
> >                        D-Link Router -----IP----  Z ATA 186 line 1
> > Y     ATA 186 line 1 /                              ATA 186 line 2
> >       ATA 186 line 2

> > Using SIP behind D-link router
> > Box X has ports 10000 and 5060 forwarded
> > Box Y has ports 10001 and 5061 forwarded
> > Box X has UIDO = 1111, UID1 = 1122
> > Box y has UIDO = 2211, UID1 = 2222
> > Box Z has UIDO = 1111, UID1 = 1122
> > I am able to call from line 1 of boxes X,Y and Z to other line 1 (X, Y,Z)
> > Cannot call any line 2
> > When calling from line two the call reciever can hear me but I cannot hear
>  them

> > Thanks in advance!!!

> > Joseph

 
 
 

HELP Cisco ATA 186 Second line

Post by k3 » Wed, 24 Jul 2002 05:22:58


I think that would be:

        2##192.xxx.xxx.xxx#  
        (# = the pound, hash, number sign, whatever on the phone)

Or in your case:

        1122##192.xxx.xxx.xxx#
        (or 2222 to call Box Y)

But I am not sure if that will solve your second problem of "When
calling from line two the call reciever can hear me but I cannot hear
them"



>Simon:
>Thanks for the reply....

>when I dial 192.xxx.xxx.xxx ..I get the first phone line or port.
>I tired using * and # and none of them has worked.


>> are you dialing the following way


>> I found this wored for me



>> > Hi all:

>> > X     ATA 186 line 1
>> >       ATA 186 line 2 \
>> >                        D-Link Router -----IP----  Z ATA 186 line 1
>> > Y     ATA 186 line 1 /                              ATA 186 line 2
>> >       ATA 186 line 2

>> > Using SIP behind D-link router
>> > Box X has ports 10000 and 5060 forwarded
>> > Box Y has ports 10001 and 5061 forwarded
>> > Box X has UIDO = 1111, UID1 = 1122
>> > Box y has UIDO = 2211, UID1 = 2222
>> > Box Z has UIDO = 1111, UID1 = 1122
>> > I am able to call from line 1 of boxes X,Y and Z to other line 1 (X, Y,Z)
>> > Cannot call any line 2
>> > When calling from line two the call reciever can hear me but I cannot hear
>>  them

>> > Thanks in advance!!!

>> > Joseph

 
 
 

HELP Cisco ATA 186 Second line

Post by Joseph Inya » Thu, 25 Jul 2002 06:25:38


Thanks
I tried it and did not work!!! after 2222## I get a busy tone

> I think that would be:

>    2##192.xxx.xxx.xxx#  
>    (# = the pound, hash, number sign, whatever on the phone)

> Or in your case:

>    1122##192.xxx.xxx.xxx#
>    (or 2222 to call Box Y)

> But I am not sure if that will solve your second problem of "When
> calling from line two the call reciever can hear me but I cannot hear
> them"



> >Simon:
> >Thanks for the reply....

> >when I dial 192.xxx.xxx.xxx ..I get the first phone line or port.
> >I tired using * and # and none of them has worked.


> >> are you dialing the following way


> >> I found this wored for me



> >> > Hi all:

> >> > X     ATA 186 line 1
> >> >       ATA 186 line 2 \
> >> >                        D-Link Router -----IP----  Z ATA 186 line 1
> >> > Y     ATA 186 line 1 /                              ATA 186 line 2
> >> >       ATA 186 line 2

> >> > Using SIP behind D-link router
> >> > Box X has ports 10000 and 5060 forwarded
> >> > Box Y has ports 10001 and 5061 forwarded
> >> > Box X has UIDO = 1111, UID1 = 1122
> >> > Box y has UIDO = 2211, UID1 = 2222
> >> > Box Z has UIDO = 1111, UID1 = 1122
> >> > I am able to call from line 1 of boxes X,Y and Z to other line 1 (X, Y,Z)
> >> > Cannot call any line 2
> >> > When calling from line two the call reciever can hear me but I cannot hear
>  them

> >> > Thanks in advance!!!

> >> > Joseph

 
 
 

1. how to connect ATA 186 Phone to ATA 186 Phone

Hi all

i have in network configured with Services Provider 2 ATA 186 installed
in my network with 2 phone

iam able to call any where in the world phone

i want to dial ATA 186 phone to ATA 186 phone

how can dial

1 ip address of ATA is 202.x.x.30
2 ip addrress of ATA is 202.63.x.31

how can dial 30 to 31

iam not able to do
could some one help me thanks
ain advacne

2. FS: S10GX-51-64-P46

3. How different is the new ATA 186-I1 from the old ATA 186 -L-I1?

4. HP E25 Server Network card configuration ( HP-UX 9.04 )

5. Cisco ATA 186 Line 2 problem

6. Jobs at Exile Interactive

7. How to get huntgroup function to work on cisco ATA 186 for 2 lines

8. Changing the STYLE parameter of a TabStrip control

9. Help on Cisco ATA 186 configuration

10. No DIAL TONE in Cisco ATA 186 --- Please Help

11. need help with configuring Cisco ATA 186

12. Help for cisco ata 186 with cable modem