Help me with autoexec.bat and config.sys (QEMM) Please

Help me with autoexec.bat and config.sys (QEMM) Please

Post by ha » Sat, 11 May 1996 04:00:00



   Hello:
       I just got my qemm v8.01. Well it seems works okay on dos. but I feel
   my windows 3.11 slow down a lot.....SO I made a config.sys by use [Menu],
   to but my old dos on(boot without install qemm). I have problem with getting
   color on the start up dos menu, so I add this two commands into config file
   to set up the color and it worked. But If I choice to use qemm. ANSI.SYS
   Has been load towice into my memory(COnvertion, Upper memory). If I use
   DEVICE=C:?QEMM?LOADHI.SYS R:2 /SIZE 9360 instead just use DEvice=C:?DOS?ansi
   .sys It will show errors...SO would you Please help me out here........
   IF you know the answer, Please e-mail to me as soon as possible.........

   There is other thing.....Look very end of this file!!!!!!!!!

DEVICE=C:?DOS?ANSI.SYS       <---- Add this
[MENU]
MENUITEM=QEMM, Use Qemm Memory Manager (Default)
MENUITEM=OLDDOS, Dos v6.20 Use Dos Memory
ME*FAULT=QEMM, 5
MENUCOLOR=2,0                <----- Add this
[QEMM]
LASTDRIVE=H
BUFFERS=20,0
FILES=40
DOS=UMB
DOS=HIGH
FCBS=16,0
SHELL=C:\QEMM\LOADHI.COM /R:2 C:\COMMAND.COM /E:512 /P
device=c:\qemm\dosdata.sys
DEVICE=C:\QEMM\QEMM386.SYS RAM R:2 ST:M

DEVICE=C:\QEMM\LOADHI.SYS /R:1 /SIZE=11520 C:\QEMM\QDPMI.SYS SWAPFILE=DPMI.SWP SWAPSIZE=1024
DEVICE=C:\QEMM\LOADHI.SYS /R:2 /SIZE=14032 C:\DOS\SETVER.EXE
DEVICE=C:\QEMM\LOADHI.SYS /R:1 /SIZE=4848 C:\DOS\IFSHLP.SYS
DEVICE=C:\QEMM\LOADHI.SYS /R:1 /SIZE=17648 C:\DOS\MTMCDAE.SYS /D:MSCD000 /P:320 /A:0 /M:12 /T:s /I:5 /X
DEVICE=C:\QEMM\LOADHI.SYS /R:2 /SIZE=48080 C:\DOS\STACKER.COM /P=9 D:\STACVOL.DSK E:\STACVOL.DSK A: B:
DEVICE=C:\QEMM\LOADHI.SYS /R:2 /SIZE=9360 C:\DOS\ANSI.SYS
DEVICE=C:\DOS\SSWAP.COM D:\STACVOL.DSK
DEVICE=C:\DOS\SSWAP.COM E:\STACVOL.DSK
STACKS=9,256

[OLDDOS]
LASTDRIVE=Z
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS D=64
BUFFERS=20,0
FILES=40
DOS=UMB
DOS=HIGH
FCBS=16,0
SHELL=C:\COMMAND.COM /E:512 /P
DEVICEHIGH C:\DOS\SETVER.EXE
DEVICEHIGH C:\DOS\IFSHLP.SYS
DEVICEHIGH C:\DOS\MTMCDAE.SYS /D:MSCD000 /P:320 /A:0 /M:12 /T:s /I:5 /X
DEVICEHIGH C:\DOS\STACKER.COM /P=9 D:\STACVOL.DSK E:\STACVOL.DSK A: B:
DEVICE=C:\DOS\ANSI.SYS
DEVICE=C:\DOS\SSWAP.COM D:\STACVOL.DSK
DEVICE=C:\DOS\SSWAP.COM E:\STACVOL.DSK
STACKS=9,256

       I Have 486 25mh with 4mb rems.....I feel my windows slow down after I
  installed qemm...IS any way you can speed up my windows. I also have stacker
  drive... Is any way qemm can speed up my stacker drives..Please mail me
  back if you do know the answer...Here is my autoexec.bat

PATH=C:\QEMM;C:\DOS;C:\BAT;C:\pkware;E:\ZWDOS;E:\cshow;D:\qpw\odapi\;D:\ga25\;
PATH=%PATH%D:\WINDOWS;D:\DOS;D:\STACKER;D:\NU;

SET NU=D:\NU
SET TEMP=C:\TEMP
SET TMP=C:\TEMP

REM THE ADDITIONAL SAFETY CHECK FOR STACKER DRIVES.
C:\DOS\CHECK /WP

C:\QEMM\LOADHI /R:2 C:\DOS\MSCDEX.EXE/D:MSCD000 /M:10
C:\QEMM\LOADHI /R:2 /LO C:\DOS\SMARTDRV.EXE 512,0
C:\QEMM\LOADHI /R:2 C:\DOS\AMOUSE.COM
C:\QEMM\LOADHI /R:2 C:\DOS\DOSKEY.COM

PROMPT $E[40;36;1m$t$_$d$_$P$G
c:\dos\vgreet

       Thank you for your time.....


     ( .',----- - - ' '      '                                         __
      \_/      ;--:-          __--------------------___  ____=========_||___
     __U__n_^_''__[.  ooo___  | |_!_||_!_||_!_||_!_| |   |..|_i_|..|_i_|..|
   c(_ ..(_ ..(_ ..( /,,,,,,] | |___||___||___||___| |   |                  |
   ,_\___________'_|,L______],|______________________|_i,!________________!_i

""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~"""~""
              Time to enjoy ride train.

 
 
 

1. MSDOS62 and no io.sys, config.sys autoexec.bat blank hard drive

I'm trying to help out some kids in a "home". Someone has formatted the
hard drive. I can't figure out how to get it back running. It will boot to
MS-DOS6.2, but it tells me I have no io.sys, no config.sys and no
autoexec.bat. I'm finding out what a rookie I am in this area... groan, I
have researched all sorts of stuff off this site and others. Not getting
anywhere. The cdrom drivers are correct ones but won't let me install them
without io.sys, config. etc.....I try to edit the autoexec and the config
files but they don't exist...WHAT am I doing wrong? please help
thanks:)           yours truly, rookie n novice

--
Posted via CNET Help.com
http://www.help.com/

2. NT4 can't boot up in Windows 2000

3. HELP: msd.exe hangs using my autoexec.bat and config.sys

4. windows2k crashes

5. Autoexec.bat, config.sys setup...HELP

6. Product-Reviews or Comparisions?

7. Problems with config.sys and autoexec.bat

8. What's TREEDEPTH variable?

9. Bypassing CONFIG.SYS and AUTOEXEC.BAT

10. 6.22 config.sys , autoexec.bat

11. My CONFIG.SYS menu can't communicate with AUTOEXEC.BAT

12. Config.sys vs. Autoexec.bat

13. Where is autoexec.bat and config.sys