by NT4SP5 Server running DHCP, DNS, Proxy 2.0, PPTP.
Two NICs: one external (IP w.x.y.z) one internal (192.168.0.x).
One DHCP scope is configured using block 192.168.0.10-99.
Clients on internal network get DHCP addresses correctly (in the range
192.168.0.10-99). No problem with internal clients.
VPN clients connect via the internet to the external NIC at w.x.y.z get
assigned a DHCP address in the subnet w.x.y.0. They should get
assigned an address in the range 192.168.0.10-99.
This was working fine previously using the same configuration, but the
system was reinstalled from scratch due to a crash. Now it doesn't
work.
Is it the bindings? Any other ideas?
TIA...
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.