Problems with CDD 2000

Problems with CDD 2000

Post by Bruno Alvare » Tue, 11 Nov 1997 04:00:00



Hi people, I own a philips CDD 2000... But when I try to burn a CD with
more than 200.000 blocks, my CD-R aborts or close the session.. I've
tried to contact philips, but both e-mail adress for technical support
are down. I sent about 3 faxes, but no awnser.

My ERROR.LOG is this:

02:13:23 PM,November 07, 1997
Start disc creation -  device:1
File system file : C:\WINDOWS\TEMP\CDWO0003.TMP
Track buffer file : C:\WINDOWS\TEMP\CDWO0004.TMP
Writing track  - length 586210832 - 1767 source file(s)
Write Buffer Size=16384
Read Buffer Size=16384
T0100: SCSI error (0B/50) - Aborted command, Write append error,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
T0100: SCSI error (0B/AD) - Aborted command, Buffer under run,  cdb 2A
00 00 00 00 00 00 00 00 00
Fixating session
D0100: SCSI error (04/44) - Hardware error, Internal controller error,
cdb E9 00 00 00 00 00 00 00 0B 00
03:06:38 PM,November 07, 1997
End disc creation

On philips support page for CDD 2000 it says that is a Potential
problem, but what should I do?

Best Regard's
Bruno Alvares