Very Computer

Anybody know how I can write an FFT program in basic to analyze low
frequency (<30hz) signals over the paddle input?

Thanks,

Pat

Quote:> Anybody know how I can write an FFT program in basic to analyze low
> frequency (<30hz) signals over the paddle input?

> Thanks,

> Pat

If you don't get a suggestion here, try comp.dsp since that is where they
live. You may have to specify basic vs C, but I am sure there is someone
there that has done it.

BTW: Paddles are only updated at 60 Hz, so you will get more then a bit of
noise if your signal is anywhere near 30 Hz. You may need to put the pots in
their fast scan mode.

Quote:>Anybody know how I can write an FFT program in basic to analyze low
>frequency (<30hz) signals over the paddle input?

>Thanks,

>Pat

If you don't need to do it in real time, I wrote several FFT and FHT
programs some years ago, using TurboBASIC XL. You will find them
at http://www.geocities.com/Hollywood/2645/a8

--
__________   ____---____       Marco Antonio  Checa  Funcke


      '-_____|(     http://www.GeoCities.com/Hollywood/2645

remove the "no_me_j." in front of the address when replying

Howdy Pat, folks

Quote:>Anybody know how I can write an FFT program in basic to analyze low
>frequency (<30hz) signals over the paddle input?

If you want more then software, try www.abbuc-raf.de/restarte.htm and click on
8-Channel dig. Voltmeter (DVM)

CU                      Mathy van Nisselroy

PS that IS the English version of the site.