### monitor router's cpu with MRTG

### monitor router's cpu with MRTG

Post by TnT2Pn » Fri, 21 Dec 2001 10:15:31



Hi, all

My router is Cisco 4700 or 7505. I want to monitor cpu with MRTG on windows
2000. I make a cfg file , "Target" is

Target[10.203.221.5.cpu]:

then "perl mrtg mrtg.cfg" , no html or png generated. but I change "Target"
to


it generates html and png , but it's not the result I want. I don't know
what's problem with my cfg file.

 
 
 

### monitor router's cpu with MRTG

Post by Steve Godfre » Fri, 21 Dec 2001 23:24:55


I use


to monitor the CPU on our 7513


> Hi, all

> My router is Cisco 4700 or 7505. I want to monitor cpu with MRTG on windows
> 2000. I make a cfg file , "Target" is

> Target[10.203.221.5.cpu]:

> then "perl mrtg mrtg.cfg" , no html or png generated. but I change "Target"
> to


> it generates html and png , but it's not the result I want. I don't know
> what's problem with my cfg file.

--
Posted from  [195.188.208.69]
via Mailgate.ORG Server - http://www.Mailgate.ORG

 
 
 

### monitor router's cpu with MRTG

Post by jo » Sat, 22 Dec 2001 00:09:33


i use this same config on routers 2600 through 7206 try it..

################################################################

MaxBytes[2621_cpu]: 100
AbsMax[2621_cpu]: 100
Options[2621_cpu]: gauge,nopercent,growright
Unscaled[2621_cpu]: dwmy
YLegend[2621_cpu]: Utilization
ShortLegend[2621_cpu]: %
LegendI[2621_cpu]:  1 Min:
LegendO[2621_cpu]:  5 Min:
Legend1[2621_cpu]: AvgBusy 1 Min
Legend2[2621_cpu]: AvgBusy 5 Min
Title[2621_cpu]: 2621_Kansas Router CPU Utilization
PageTop[2621_cpu]: <H1>2621_Kansas Router CPU Utilization</H1>

################################################################
uter_IP>
MaxBytes[2621_mem]: 15365292
Options[2621_mem]: gauge,nopercent,growright
Unscaled[2621_mem]: dwmy
YLegend[2621_mem]: Memory Used
ShortLegend[2621_mem]: Bytes
LegendI[2621_mem]: &nbsp;Used
LegendO[2621_mem]: &nbsp;Free
Legend1[2621_mem]: Memory Used
Legend2[2621_mem]: Memory Free
Title[2621_mem]: 2621_Kansas Memory Utilization
PageTop[2621_mem]: <H1>Memory Utilization of 2621_Kansas Memory</H1>


> Hi, all

> My router is Cisco 4700 or 7505. I want to monitor cpu with MRTG on windows
> 2000. I make a cfg file , "Target" is

> Target[10.203.221.5.cpu]:

> then "perl mrtg mrtg.cfg" , no html or png generated. but I change "Target"
> to


> it generates html and png , but it's not the result I want. I don't know
> what's problem with my cfg file.