catt 5500 problem

catt 5500 problem

Post by b.. » Wed, 09 Jul 2003 00:30:31



when using cfgmaker to build the mrtg config for some reason it does
not reture an interface name  I amd using the following command:
/usr/bin/cfgmaker --global 'WorkDir: /opt/mrtg/switches' --global
'Options[_]:bits,growright' --global 'Weekformat[^]:V' --global
'LogFormat: rrdtool' --output /etc/mrtg/switches/Cat55-Tulsa-12-A.cfg
--ifref=name --ifdesc=name --subdirs=HOSTNAME__SNMPNAME

Looking at the config shows as below. Note that both DESCR and Name
are blank. :

### Interface 1 >> Descr: '' | Name: '' | Ip: '20.1.2.10.20.27.240' |
Eth: '00-02-7d-0b-4b-ff' ###


SetEnv[10.20.27.240_1]: MRTG_INT_IP="20.1.2.10.20.27.240"
MRTG_INT_DESCR=""
Directory[10.20.27.240_1]: 10.20.27.240__CAT55-Tulsa-12-A
MaxBytes[10.20.27.240_1]: 1250000
Title[10.20.27.240_1]: 1 -- CAT55-Tulsa-12-A
PageTop[10.20.27.240_1]: <H1>1 -- CAT55-Tulsa-12-A</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>CAT55-Tulsa-12-A in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>10.0 Mbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>20.1.2.10.20.27.240
(tmcphaul02.vtc.csc.com)</TD

Quote:></TR>

 </TABLE>

This is running on redhat 9 using mrtg 2.9.17

I have another server running redhat 7.3 that works fine.

 
 
 

1. Cat 5500 + RSP vs 5500 + 7500

What is the best combination for routing between local subnets?

1. A Catalyst 5500 with an RSP?
2. A Catalyst 5500 hooked into a 7500 via FDDI?

I'm going to purchase a 5500 in any case, but I'm just wondering if it is
worth considering the RSP for it.
--
"By pressing the spacebar you will kill yourself"  - Self Deliverance Software


     XMission Internet Access - Data: 801 990 0900 - Voice: 801 539 0852

2. BitSURFR 64Kbps, NT3.51RAS, PACBell

3. Cisco Catalyst 5500 - Routing between VLAN problems?

4. Windows Explorer - left pane blank

5. Catalyts 2900 Connect to Catalyst 5500 Problem

6. Supra v32bis Fax Modem Voice Upgrade.

7. Problem with WS-X5222R in a Catalyst 5500

8. PR511 Questions

9. Connecting Cisco Catalyst 5500 to network introduces VLAN problems

10. 5500 Cisco Switch/Gigabit card problem

11. 5500 Console/router problem...

12. Problem with Supervisor Module on catalyst 5500

13. Problem with Cisco 5500 talking to Cat 2924MXL via VLAN thru