MRTG- Error with Multiple Router mrtg.cfg

MRTG- Error with Multiple Router mrtg.cfg

Post by stn1.. » Wed, 01 Nov 2000 02:05:19



I get an SNMP Error when running this:  Can someone tell me what I"m
doing wrong.  I don't get the error if I do it for ONE router.



growright,bits" --global "WorkDir: c:\www\mrtg" --output mrtg.cfg --

--base: Vendor Id: cisco
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifAlias

SNMP Error:
close: Bad file descriptor
SNMPv1_Session (remote host: "10.10.10.11"
[10.10.10.11].161                   community: "dl-cnad"
                request ID: 1406799458
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
--base: Vendor Id: cisco
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifAlias

SNMP Error:
close: Bad file descriptor
SNMPv1_Session (remote host: "10.10.30.11"
[10.10.30.11].161                   community: "dl-cnad"
                request ID: 789076332
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
--base: Vendor Id: cisco
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifAlias
--base: Writing mrtg.cfg

C:\mrtg-2.9.2\bin>

Sent via Deja.com http://www.deja.com/
Before you buy.

 
 
 

MRTG- Error with Multiple Router mrtg.cfg

Post by kree.. » Thu, 16 Nov 2000 04:00:00


I have the same problem, would be interested in any solutions. Graphs
still seem to generate despite error.
Also, the time displayed on the graph is wrong. My statistics last
updated shows the correct time, but the graph timeline itself shows GMT.



> I get an SNMP Error when running this:  Can someone tell me what I"m
> doing wrong.  I don't get the error if I do it for ONE router.



> growright,bits" --global "WorkDir: c:\www\mrtg" --output mrtg.cfg --

> --base: Vendor Id: cisco
> --base: Populating confcache
> --base: Get Interface Info
> --base: Walking ifIndex
> --base: Walking ifType
> --base: Walking ifSpeed
> --base: Walking ifAdminStatus
> --base: Walking ifOperStatus
> --base: Walking ifAlias

> SNMP Error:
> close: Bad file descriptor
> SNMPv1_Session (remote host: "10.10.10.11"
> [10.10.10.11].161                   community: "dl-cnad"
>                 request ID: 1406799458
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> --base: Vendor Id: cisco
> --base: Populating confcache
> --base: Get Interface Info
> --base: Walking ifIndex
> --base: Walking ifType
> --base: Walking ifSpeed
> --base: Walking ifAdminStatus
> --base: Walking ifOperStatus
> --base: Walking ifAlias

> SNMP Error:
> close: Bad file descriptor
> SNMPv1_Session (remote host: "10.10.30.11"
> [10.10.30.11].161                   community: "dl-cnad"
>                 request ID: 789076332
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> --base: Vendor Id: cisco
> --base: Populating confcache
> --base: Get Interface Info
> --base: Walking ifIndex
> --base: Walking ifType
> --base: Walking ifSpeed
> --base: Walking ifAdminStatus
> --base: Walking ifOperStatus
> --base: Walking ifAlias
> --base: Writing mrtg.cfg

> C:\mrtg-2.9.2\bin>

> Sent via Deja.com http://www.deja.com/
> Before you buy.

Sent via Deja.com http://www.deja.com/
Before you buy.

 
 
 

1. Error message when running perl mrtg mrtg.cfg

Hello,

   I'm pretty sure that I followed the
instructions carefully, but when I run perl mrtg
mrtg.cfg, I get the following error

"ERROR: Can't find location of mrtg executable
BEGIN failed--compilation aborted at mrtg line
57."

Keep in mind that I'm running on a win2k box,
using ActiveState perl.

Thanks

Sent via Deja.com http://www.deja.com/
Before you buy.

2. Morley SCSI Utils & Wimpslot

3. MRTG and mrtg.cfg-problem!

4. Very strange problem when publishing FP98???

5. perl mrtg mrtg.cfg

6. Specific Example of Problem with Complementary 56800 Codewarrior

7. MRTG - Cisco675 - ADSL - mrtg.cfg

8. html-mode error

9. Can I run MRTG with multiple cfg-files on NT4 ?

10. Newbie Question - Adding devices to mrtg.cfg

11. mrtg.cfg imagefile and logfiles problem

12. Warning while running mrtg.cfg- please help

13. mrtg.cfg lock files