SNMP error

SNMP error

Post by BSD » Sun, 11 May 2003 20:32:19



I have installed MRTG on my FreeBSD .... when i try to monitor it
I get this


SNMP Error:
no response received
SNMPv1_Session (remote host: "monitor" [10.5.1.97].161)
                  community: "public"
                 request ID: 109388187
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/lib/perl5/site_perl/5.005/SNMP_util.pm line 458
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on

 at /usr/local/bin/cfgmaker line 673
--base: Vendor Id:
--base: Populating confcache

support it

support it

support it

seem to support it

seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
 
 
 

SNMP error

Post by BSD » Sun, 11 May 2003 20:53:14


also this one
monitor# snmpwalk 127.0.0.1 public
snmpwalk: No securityName specified


> I have installed MRTG on my FreeBSD .... when i try to monitor it
> I get this


> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "monitor" [10.5.1.97].161)
>                   community: "public"
>                  request ID: 109388187
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
>  at /usr/local/lib/perl5/site_perl/5.005/SNMP_util.pm line 458
> SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on

>  at /usr/local/bin/cfgmaker line 673
> --base: Vendor Id:
> --base: Populating confcache

> support it

> support it

> support it

> seem to support it

> seem to support it
> --base: Get Interface Info
> --base: Walking ifIndex
> SNMP Error:
> no response received


 
 
 

SNMP error

Post by Dave Shiel » Thu, 15 May 2003 21:21:21



> monitor# snmpwalk 127.0.0.1 public
> snmpwalk: No securityName specified

My guess is that you've installed a v5 Net-SNMP package,
with the default default SNMP version (i.e. SNMPv3).

You probably need to specify the SNMP version explicitly.
This line also no longer support "positional" community parameters.

Try
        snmpwalk -v 1 -c public  127.0.0.1

Dave

 
 
 

1. C2950 and SNMP error

Each day arround 14u00 our C2950 is going to 100% CPU. Somethimes everything
is goiing sow then.

I found this in the log

Any idea

Jul 28 14:08:19: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an
infinite loop on MAC Address 0100.5e00.0012
Jul 28 14:08:19: %SNMP-3-CPUHOG: Processing GetNext of
dot1dTpFdbEntry.1.0.224.123.210.25.4
Jul 28 14:09:17: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an
infinite loop on MAC Address 0100.5e00.0012
Jul 28 14:10:14: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an
infinite loop on MAC Address 0100.5e00.0012
Jul 28 14:10:14: %SYS-3-CPUHOG: Task ran for 16828 msec (38944/0), process =
IP SNMP, PC = 801D1C9C.
-Traceback= 801D1CA4 80076610
Jul 28 14:11:12: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an
infinite loop on MAC Address 0100.5e00.0012
Jul 28 14:11:12: %SNMP-3-CPUHOG: Processing GetNext of
dot1dTpFdbEntry.1.0.224.123.210.25.4
Jul 28 14:12:10: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an
infinite loop on MAC Address 0100.5e00.0012
Jul 28 14:13:07: cfg_bridgePlatformNextTpFdbEntry: Error, forced exit of an
infinite loop on MAC Address 0100.5e00.0012
Jul 28 14:13:07: %SYS-3-CPUHOG: Task ran for 16336 msec (39030/16), process
= IP SNMP, PC = 801D1C9C.
-Traceback= 801D1CA4 80076610

Tom Pouce

2. Modify default FP form validation text?

3. SNMP error messages

4. PhD thesis available: Model-Based Neural Networks for Invariant Pattern Recognition

5. SNMP Errors to look for

6. FS:Strong Arm Card, with 3.7 ROMS

7. snmp error codes of 826/827 routers

8. SNMP error with Cat5500 and CWSI

9. snmp error checking which field to check?

10. MRTG v2.9.17 to v2.9.29 with Nortel BayRS = intermitant SNMP error

11. snmp error

12. MRTG - SNMP error