Passport 15000 help

Passport 15000 help

Post by RYDRC » Fri, 07 Feb 2003 02:42:10



I have a customer that has a Passport 15000 and the processor
continually reboots when it tries to initialize the shelf.  If you
think you may be able to help solve this, please conatct me.

Thanks,
Brian Braisted
RYDRCOM

 
 
 

Passport 15000 help

Post by Kbill » Sat, 08 Feb 2003 02:03:32


Is there a SW-upgrade done recently ?

Rgds,

Kbilla



> I have a customer that has a Passport 15000 and the processor
> continually reboots when it tries to initialize the shelf.  If you
> think you may be able to help solve this, please conatct me.

> Thanks,
> Brian Braisted
> RYDRCOM



 
 
 

Passport 15000 help

Post by Carlos Ramir » Sat, 08 Feb 2003 03:58:32


There are some virus that can make the Switch to reboot, you can see
the CPU utilization, Have you see the log ?

Carlos.

 
 
 

Passport 15000 help

Post by RYDRC » Sun, 09 Feb 2003 01:36:54


carlos.rami...@orben.com (Carlos Ramirez) wrote in message <news:fe0fbd65.0302061058.e963f28@posting.google.com>...
> There are some virus that can make the Switch to reboot, you can see
> the CPU utilization, Have you see the log ?

> Carlos.

Here is what they sent me:

Firmware PM2 Version CC01S1F   Creation Date: Sat Mar 9 06:08:12 EST
2002

*** Booting a Control Processor ***

Testing 0x04000000 bytes of memory at 0xd0000000....................
OK
Decompressing FLASH image... done.
?Initializing and clearing the persistent heap...  done.

Active FLASH bank burn count > alternate bank burn count.

                  ===> Performing Processor Module tests <===

testing Register Access ......................... Passed

testing Shared Memory  (0x200000) ............... Passed

testing Serial Controller h e c u ....................... Passed

testing Flash ................................... Passed

testing Error Logic ............................. Passed

testing Counters ................................ Passed

                ===> Performing Control Processor IM tests <===

testing Register Access ......................... Passed

testing Ethernet ................................ Passed

testing Stratum Clock  * Skipped *

testing Disk Controller ......................... Passed

testing IM Flash ................................ Passed

Performing hardware initialization...Resetting the local/shared bus
error registers... done

Initializing the PDC Counter/Timers... done

Setting INTRAM_OFFSET_INTFP to zero... done

Setting up default write protect state...

Initializing write protect library...

pmSetupWriteProtect : wpCp2etRegionTbl

Cardtype Info in EPROM = 0x9000603b , stype = 0x6000

pmSetupWriteProtect : wpCpimRegionTbl

pmSetupWriteProtect : Ethernet registers

Disabling write protect in memory regions...

Region 0: Start Address = 0xfef00000, Size = 0x100000

Region 2: Start Address = 0xd0000000, Size = 0x4000000

Region 3: Start Address = 0xb0000000, Size = 0x200000

... done

Write protecting from d0008000 to d01057ff... done

Enabling write protect... done

 done

PM Hardware init finished

. done.

Performing EIDE disk self-tests... Passed

Initializing sd0 as dos file system '/local' ... succeeded.

Creating disk cache...  done.

Adding 5445 symbols for standalone.

Adding 108 symbols from IM image .

Attaching network interface ei0...  done.

              ***

**     **   **   ***oo  *******  ********  *******  **

****   **  **    oo** o **   ***    **     **       **

** **  **  ** ooo   **  **    **    **     **       **

**  ** **  **o      **  *******     **     ******   **

**   * **  o**      **  **  **      **     **       **

**    *** o  **    *    **  ***     **     **       **

**     **  oo  ****     **    ***   **     *******  ******

                   **   ** ***** ****** **   **  *****  *****  **   **
**** TM

                   ***  ** **      **   **   ** **   ** **  ** **  **
**

                   ** * ** ****    **   ** * ** **   ** *****  ****  
****

                   **  *** **      **   *** *** **   ** ** **  **  **
   **

                   **   ** *****   **   **   **  *****  **  ** **   **
****

                           Nortel Networks Passport

                             Copyright  1991-2001

CPU: i960 HD (B0-step).  Processor #1

Initializing backplane communication sub-systems...

Transient Memory Storage at: 0xd3529940

Rebooting...?

Firmware PM2 Version CC01S1F   Creation Date: Sat Mar 9 06:08:12 EST
2002

*** Booting a Control Processor ***

Testing 0x04000000 bytes of memory at 0xd0000000....................
OK
Decompressing FLASH image... done.
?Checking persistent heap... done.

Active FLASH bank burn count > alternate bank burn count.

                  ===> Performing Processor Module tests <===

testing Register Access ......................... Passed

testing Shared Memory  (0x200000) ............... Passed

testing Serial Controller h e c u ....................... Passed

testing Flash ................................... Passed

testing Error Logic ............................. Passed

testing Counters ................................ Passed

                ===> Performing Control Processor IM tests <===

testing Register Access ......................... Passed

testing Ethernet ................................ Passed

testing Stratum Clock  * Skipped *

testing Disk Controller ......................... Passed

testing IM Flash ................................ Passed

Performing hardware initialization...Resetting the local/shared bus
error registers... done

Initializing the PDC Counter/Timers... done

Setting INTRAM_OFFSET_INTFP to zero... done

Setting up default write protect state...

Initializing write protect library...

pmSetupWriteProtect : wpCp2etRegionTbl

Cardtype Info in EPROM = 0x9000603b , stype = 0x6000

pmSetupWriteProtect : wpCpimRegionTbl

pmSetupWriteProtect : Ethernet registers

Disabling write protect in memory regions...

Region 0: Start Address = 0xfef00000, Size = 0x100000

Region 2: Start Address = 0xd0000000, Size = 0x4000000

Region 3: Start Address = 0xb0000000, Size = 0x200000

... done

Write protecting from d0008000 to d01057ff... done

Enabling write protect... done

 done

PM Hardware init finished

. done.

Performing EIDE disk self-tests... Passed

Initializing sd0 as dos file system '/local' ... succeeded.

Creating disk cache...  done.

Adding 5445 symbols for standalone.

Adding 108 symbols from IM image .

Attaching network interface ei0...  done.

              ***

**     **   **   ***oo  *******  ********  *******  **

****   **  **    oo** o **   ***    **     **       **

** **  **  ** ooo   **  **    **    **     **       **

**  ** **  **o      **  *******     **     ******   **

**   * **  o**      **  **  **      **     **       **

**    *** o  **    *    **  ***     **     **       **

**     **  oo  ****     **    ***   **     *******  ******

                   **   ** ***** ****** **   **  *****  *****  **   **
**** TM

                   ***  ** **      **   **   ** **   ** **  ** **  **
**

                   ** * ** ****    **   ** * ** **   ** *****  ****  
****

                   **  *** **      **   *** *** **   ** ** **  **  **
   **

                   **   ** *****   **   **   **  *****  **  ** **   **
****

                           Nortel Networks Passport

                             Copyright  1991-2001

CPU: i960 HD (B0-step).  Processor #1

Initializing backplane communication sub-systems...

Transient Memory Storage at: 0xd3529940

 
 
 

1. WTB Passport 15000 Gear

I have an immediate need for the following:

NTQS10DA
Passport 15K Single Shelf Base-CP3-DS1

NTHR17XX
4-Port OC3-C/STM1 ATM Function Processor (Multimode)

NTHR23XX
12-Port ATM Function Processor Card

NTHR70AA
DS3/E3 DB9-DB9 Controller Cable Assy (5M)

NTQS31AA
1:N Sparing Panel Package for NTHR23XX
        Includes:
                NTHR37
                NTHR39
                NTHR42

NTHR31XX
4-Port DS3 ATM Channelized Function Processor Card

NTHR73AA
DS3/E3 8W8-8W8 Mini Coax Cable Assy (5M)

NTHR64AA
FP/CP Filler Modules

Thanks,
Brian Braisted
RYDER Communications, Inc.
Wide Area Networking Solutions
35B Wilson Drive
Sparta, NJ  07871-3427
Tel. 973-940-7350 / 1-877-RYDRCOM x227
FAX. 973-940-7355 / 1-877-RYDRFAX

www.rydrcom.com

2. Zoom Link Negotiation

3. Looking for Passport 15000 equipment

4. Whats The Highest speed Of A Modem?(NON_ISDN)

5. Anyone using Passport 15000's?

6. SKsh problem

7. IP Multicast,MPLS and other issues on a Passport 15000

8. Printer drivers and where they come from

9. Going rate for a Cisco 15000 or 15900

10. 15000 users in a NW 4.1 group: practical?

11. ATTENTION: MUST SALE - DataGeneral 15000

12. Is it worth getting DSL if I am 15000 feet away?

13. Is DSL realistic at 15000 from CO?