nortel baystack 450-24T

nortel baystack 450-24T

Post by sm » Wed, 02 May 2001 20:30:04



hi,

i can't connect to that nortel switch through his console/serial port.
i tried to connect with the NC terminal and with win2000 hiperterminal -
but nothing , i'm still offline.

please help me

thanx a lot

sm

--
Posted via CNET Help.com
http://www.help.com/

 
 
 

nortel baystack 450-24T

Post by Jay Drenna » Wed, 02 May 2001 22:04:47


Is HyperTerminal configured for 9600, 8, none, 1?

You also have to press CNTRL+Y.

Jay

Quote:> hi,

> i can't connect to that nortel switch through his console/serial port.
> i tried to connect with the NC terminal and with win2000 hiperterminal -
> but nothing , i'm still offline.

> please help me

> thanx a lot

> sm

> --
> Posted via CNET Help.com
> http://www.help.com/


 
 
 

nortel baystack 450-24T

Post by Rabid D » Thu, 03 May 2001 11:24:32


Use a traight-thru serial cable (Not a cable with pins 2 and 3
crossed. Check with an continuity tester if you aren't absolutely
sure). Use windows hyperterminal, set to 9600, 8, N, 1 with No flow
control
Then you are in (hit CTR+Y to get a login prompt)

>hi,

>i can't connect to that nortel switch through his console/serial port.
>i tried to connect with the NC terminal and with win2000 hiperterminal -
>but nothing , i'm still offline.

>please help me

>thanx a lot

>sm

 
 
 

nortel baystack 450-24T

Post by Norm » Thu, 03 May 2001 18:58:21


I didn't see anything attached there.

What I am trying to do is to connect between 2 and 4 of the ports on the
350-24T & the 350-12T to increase the bandwidth between the two. Is this
possible on these switches.


> Use a traight-thru serial cable (Not a cable with pins 2 and 3
> crossed. Check with an continuity tester if you aren't absolutely
> sure). Use windows hyperterminal, set to 9600, 8, N, 1 with No flow
> control
> Then you are in (hit CTR+Y to get a login prompt)


> >hi,

> >i can't connect to that nortel switch through his console/serial port.
> >i tried to connect with the NC terminal and with win2000 hiperterminal -
> >but nothing , i'm still offline.

> >please help me

> >thanx a lot

> >sm

 
 
 

1. FS: Baystack 450-24T's and cards; ARN's

I have the following Baystack products in stock:

450-24T USED (10 available)
450-1LX NEW/SEALED (6 available)
400-ST1 USED (10 available)
400-4FX USED (4 available)
400-2FX USED (8 available)
400-4TX USED (4 available)
8100-4TX USED (1 available)
ARN CV1001004 Ethernet 16M DRAM w/ 16M Flash card, TR/Tri-serial
expansion mod., X.25 PAD WAN module and fanout, v.34 WAN module, and
v.34 console modem module (2 available)

Please reply with any interest to:

Thanks!

2. Display Node name

3. Hummingbird Exceed's TFTP Daemen and BayStack 450-24T

4. Binaries submission

5. baystack 450-24T version upgrade

6. NEWBIE: limiting queries on authorative name server

7. Baystack 450-24T and Software v4.0.0.26 !?

8. WTB: Old version of Stand Alone Lightwave

9. Upgrading 450-12T 10/100 to 450-24T 10/100/1000 with Fibre Link

10. BayStack 450/24T Switch- Telnet Option

11. MRTG and Nortel Baystack 450

12. 450 Baystack w/ BayStack 400-ST1 module

13. Bay 450-24T HELP please